0
look in a chemistry textbook and find the specific heat capacity of air. that is how much energy (in BTUs) it takes to raise the temperature of 1 litre of air by 1 degree. multiply that number by the volume of your room (in liters) then divide 27000 by that number.
in maths you want 27000/(volume of room*specific heat capacity of air)
What else can I help you with?
How many square feet does 5100 Btu's heat?
The heating capacity of 5,100 BTUs can typically heat a space of approximately 150 to 250 square feet, depending on factors such as insulation, ceiling height, and climate. In well-insulated areas, you may be able to heat closer to 250 square feet, while in less insulated spaces, it may be closer to 150 square feet. Always consider local conditions for the best estimate.
Is furnace volume measured in square feet or cubic feet?
Furnace volume is typically measured in cubic feet, not square feet. This measurement refers to the total space within the furnace where combustion takes place and heat is generated. Square feet is used to measure the surface area of a space, while cubic feet measures the total three-dimensional volume.
How many watts does it take to heat 700 square feet?
The wattage required to heat 700 square feet depends on factors like insulation, ceiling height, and climate. A general rule of thumb is to use about 10 watts per square foot for heating, which would mean approximately 7,000 watts for 700 square feet. However, this can vary, so it's best to consult with a heating professional for a more tailored assessment based on specific conditions.
Is fire in a fireplace a physical or chemical property?
Fire is not a physical or chemical property. Fire is not a property. Fire is a chemical reaction where oxygen combines with some or all of the chemical components of the fuel, emitting light and heat.
When you burn a log in the fireplace or burn gasoline in a car is the reaction an endothermic or exothermic reaction?
Both burning a log in a fireplace and burning gasoline in a car are examples of exothermic reactions. These reactions release energy in the form of heat and light as they occur. The heat and light produced during the combustion process are key to generating the energy needed to heat a room or propel a vehicle.
Will an electric fireplace reduce oil costs?
A 1500 watt Electric fireplace will heat 400 square feet to a comfortable temperature within 30 minutes. Thus you won't have to turn on the house heat or be able to keep it at a lower setting. A Electric Fireplace cost about $30 a month to run 5-6 hours a day.
What is the answer for this a chair is placed several feet from a fireplace the fireplace has a glass screen the side of the chair facing the fireplace gets warm because of?
The chair gets warm from the radiant heat produced by the fireplace. The glass screen on the fireplace reflects and magnifies the heat, causing the side of the chair facing the fireplace to warm up.
How many square feet will 26000 btus heat?
how many square feet will 26,000.00 heat
What type of energy conversion occurs when you place your feet near the fireplace and they become warm radiant to thermal thermal to mechanical mechanical to chemical nuclear to thermal?
When you place your feet near the fireplace and they become warm, the energy conversion is from thermal to radiant. The fireplace radiates heat energy which warms your feet.
How many square feet does 14000 BTU heater heat?
how many square feet does a 14,000 btu heater heat
How many btu to heat 1000 square feet?
It takes about 50,000 btus to heat 1000 square feet
What type of energy conversion occurs when you place your feet near the fireplace and they become warm?
The energy conversion that occurs is from thermal energy (heat) produced by the fireplace to thermal energy absorbed by your feet, increasing their temperature.
How many square feet does 4800 btus heat?
4800 BTUs will 150 square feet.
How many square feet does a 200000 BTU heater heat?
A 200,000 BTU wood burning stove will heat 1,000 square feet.
How many watts are required to heat a room of 100 square feet?
To heat a room of 100 square feet, approximately 10,000 watts of power are required.
Heat given off by a fireplace is an example of conduction convection radiation insolation?
The fireplace's heat is an example of radiation.
How does a fireplace fan blower enhance the efficiency of a fireplace?
A fireplace fan blower helps to distribute heat more evenly throughout the room by pushing warm air away from the fireplace and into the surrounding space. This helps to increase the overall efficiency of the fireplace by maximizing the heat output and reducing heat loss.
