A cubic yard of 57 gravel typically weighs around 1.4 tons or 2,800 pounds.
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
The conversion factor for cubic yards to tons depends on the material being measured. For example, one cubic yard of gravel or sand generally weighs around 1.3 tons, while one cubic yard of concrete or asphalt weighs closer to 2.4 tons. It's important to know the specific material you are working with in order to accurately convert between cubic yards and tons.
To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.
There are 202 gallons in one cubic yard.
as a rule of thumb, 1 cubic yard of concrete weighs about 4,000lbs or 2 short tons
8
1.6 tons
There is approximately 1. 35 tons in a cubic yard of fine sand.
A cubic yard of 57 gravel typically weighs around 1.4 tons or 2,800 pounds.
the answer is about 1.18 short tons. the answer is about 1.18 short tons.
Approximately, plus or minus. (rounded)
1 cubic yard of dirt typically weighs about 1.4 to 1.7 tons, depending on the type of dirt.
The answer depends upon the material to which you are referring too. A cubic yard of compressed cotton is obviously going to weigh less than a cubic yard of steel.
1.5 to 1.65 tons per CY.
It depends what kind of waste it is. A cubic yard of soil is aprox. 1 ton.
One cubic yard of broken limestone weighs about 1.3 tons. One cubic yard of pulverized limestone weighs about 1.17 tons.