One ampere is equal to one watt in a system with a voltage of one volt. This relationship is defined by Ohm's Law, which states that power (in watts) is equal to current (in amperes) multiplied by voltage (in volts).
One horsepower is approximately equal to 745.7 watts.
There are 1,000 terawatts in one gigawatt. This is because one terawatt is equal to one trillion watts, and one gigawatt is equal to one billion watts.
One quadrillion watts is equal to one million gigawatts.
The relationship between watts and amperes depends on the voltage. For a direct current (DC) circuit, the formula is Watts = Amperes x Volts. So, for a circuit with 1 ampere at 1 volt, the power would be 1 watt.
One ampere is equal to 1000000 microamperes.
The definition is that 746 watts equal one horse-power.
1,000 watts
Do you mean 'megavolt ampere' (MV.A) or 'millivolt ampere' (mV.A)? By using the incorrect symbol ('mva'), this is not clear.To determine the apparent power, in volt amperes, you divide the true power, in watts, by the power factor of the load. One volt ampere is one-millionth of a megavolt ampere ('MV.A' -not 'mva') -assuming you don't mean 'millivolt ampere' ('mV.A')!
1 kVA is equal to 1,000 volt-amperes. The conversion between volt-amperes (VA) and watts (W) depends on the power factor of the load. For resistive loads and a power factor of 1 (unity), 1 kVA is equal to 1 kW (kilowatt). However, for loads with different power factors, the relationship between kVA and kW varies.
Watts is a unit of power, whereas Amperes is a unit of current. They're related though, along with Voltage, Resistance etc. But they're not the same thing, so to answer your question: There are no watts in an ampere! Power (W) = Voltage (V) x Current (I)
It takes 0.7462 kW to equal one horsepower.
Watts (or kilowatts) and amperes are used to measure different things. Watts is a unit of power; ampere is a unit of current. The relationship (for direct current) is: watt = ampere x volt For AC, the relationship is a bit more complicated: watt = ampere x volt x power factor However, the power factor is often close to one.
Milli means 1/1000, and amp is short for ampere, so that is 0.001 ampere.
120 Watts in a 120 Volt system and 240 Watts in a 240 volt 1 phase system and 415 watts in a 240 Volt 3 phase system.AnswerThe SI unit for electric current, the ampere, is defined as 'that constant current which, if maintained in each of two, straight, parallel conductors of infinite length and negligible cross-sectional area, and placed one metre apart in a vacuum, would produce between them a force of 2 x 10-7 newtons per unit length'.
There are 1000 milliamperes in one ampere. Therefore, 15 milliamperes is equal to 15/1000 = 0.015 amperes.
One ampere is equivalent to one coulomb per second.