4" suspension do not try a body lift, go to Superlift's web site, they have a chart that tells exactly what is needed.
It would depend on the size and strength of the electromagnet, as well as the weight of the car. In general, a very strong electromagnet would likely need thousands of volts to lift a car safely and effectively.
To lift an object, you need to overcome its weight, whereas to start it sliding you need to overcome both its weight and the static friction force. The force needed to lift the object would be equal to its weight, whereas the force needed to start it sliding would be the weight of the object plus the product of the coefficient of static friction and the weight of the object. Therefore, the force needed to lift the object would be less than the force needed to start it sliding by the weight of the object multiplied by the coefficient of static friction.
By trying to lift too much weight.
Macho Matt can lift 200 kilograms with ease. How much is this in pounds?
1791.044776119403 cubic feet176 / 0.067 = 1791.044776119403
The force needed to lift a weight of 200N would be 200N. This is because the force needed to lift an object against gravity is equal to the weight of the object itself.
How much lift do i need to clear 44's on a 1985 Toyota Pickup, Stick shift?
To lift 200 pounds of weight, you would need to apply a force equal to the weight being lifted, which in this case is 200 pounds. This is because the force needed to lift an object against gravity is equal to its weight.
Strength (how much can you lift), endurance (how often can you lift), stamina (how long can you lift) and balance are the key skills needed to climb technical rock.
The same force as the weight of the helicopter and its crew and cargo.
To lift 400 pounds, you would need approximately 74.3 cubic feet of helium. Helium is lighter than air, so it provides lift when contained in a balloon.
Using a single fixed pulley will not change the amount of effort needed to lift a load. You will need to exert a force equal to the weight of the load, in this case 10 newtons, to lift it. The fixed pulley only changes the direction of the force needed, not the amount of force required.
The cost will depend on the make and model of the van, the type/make/model of lift you require or choose and the amount of work that will be needed to install the lift. There is a wide range in costs from $700 to $3000.
The answer depends on the mass of the piano and the height of the floor.
If you have 2 pulleys in a system to lift a 100 lb object, the amount of force required to lift it would be 50 lbs. This is because the weight is distributed evenly between the two pulleys, therefore reducing the force needed to lift the load.
If the pulley is fixed (hanging from the ceiling), and the rope passes over it, then 100 lbs of force is required. If the rope is fixed to the ceiling and passes under the pulley (which is fixed to the load), then 50 lbs of force is required.
You would need approximately 65 cubic feet of helium to lift 1 pound. Helium provides lift because it is lighter than the surrounding air, creating buoyancy.