3 smart one...
To find the amount of each chemical needed, let's assume the weights of the second and third chemicals are 5x and 4x, respectively. Since the second and third chemicals must be in a 5:4 ratio, their weights will be 50% and 40% of the total mix, respectively. This means that if the total mix is 100 units, the weights of the second and third chemicals are 50 units and 40 units, respectively. This leaves 10 units for the first chemical, making the amounts needed to be 10 units for the first chemical, 50 units for the second chemical, and 40 units for the third chemical.
It is estimated that New Zealanders use around 1.6 billion single-use plastic bags each year, which averages out to approximately 4.4 million bags per day. However, this number may have decreased since the introduction of the ban on single-use plastic bags in New Zealand in 2019.
It has been estimated that approximately 1 million bags bags are consumed in the world every minute
The number of bags of rocks in 12.25 cubic feet will depend on the size and weight of the bags. To determine the number of bags, divide the total volume of rocks (12.25 cubic feet) by the volume of each bag.
The number of bags of barley per acre that equals one ton will vary depending on the weight of each bag. If each bag typically weighs 48 pounds, then it would take around 44 bags per acre to equal one ton (2000 pounds).
Start by finding the area of the entire brownie. Area = Length x Width. Both Length and Width are '5' in this case. 5 x 5 = 25 The area of the ENTIRE brownie is 25. You're trying to find the area of each piece, so you divide 25 (the area) by 2 (2 halves of the brownie). 25 divided by 2 = 12.5 Therefore, each brownie half is 12.5
10 bags will give you 6'2/3", seven bags will give you 11 bags will give you 7'1/3". Each bag is 2/3 cu feet.
25 litre bags of what? Hydrogen: each 25 litre bag weighs about 2.2g, so about 444939 bags are needed for 1 tonne Mercury: each 25 litre bag weighs about 338.4 kg, so about 3 bags are needed for 1 tonne.
F = W = ( 20 bags ) ( 50 lbf/bag ) ( 4.4482 N / lbf ) = 444.82 N <---[ Answer ]-------
To determine the total number of empty bags needed to pack cookies, you need to know how many cookies you're packing and how many cookies fit in each bag. Once you have the total number of bags required, divide that number by 10 (the number of bags per package) to find out how many packages are needed. For example, if you need 25 bags, you would need 3 packages, since 25 divided by 10 equals 2.5, rounding up to 3 packages.
4 bags of 50 kg each= 200 kg of cement.
31.5 bags 3.5×360=1260 once = 78.75 pound Therefore 78.75/2.5=31.5 bags
The number of bags of sand needed for a ton depends on the weight of each bag. Standard bags of sand typically weigh 50 pounds. Since there are 2,000 pounds in a ton, you would need 40 bags of 50-pound sand to equal one ton.
There is a wide variety of Brownie Girl Scout and Girl Guide Badges. Each badge has its own name and requirements. Each badge represents the topic of the steps taken to earn the badge.
Each of them must be baked before they are ready to eat.
4 (four) bags. If they purchased three bags, they would only have 75 connecters instead of the needed 88.
2 Whole Bags!