answersLogoWhite

0

4.8

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

If i irrigate 3000 gallons of water over 4 acres how many inches per acre?

To find out how many inches of water are being applied per acre, you can use the formula: inches of water per acre = (total gallons of water * 0.133681) / total acres. In this case, 3000 gallons of water divided by 4 acres equals 750 gallons per acre. To convert gallons to inches, multiply 750 by 0.133681 to get approximately 100 inches of water per acre.


If you put 21 ounces of a chemical per 100 gallons of water how many ounces would you put in 1 gallon of water?

21 ounces to 100 gallons of water means (21/100) = 0.21 ounce per gallon of water.The proper amount of chemical is only 0.16% of the amount of water it goes into. It's hard to get the correct concentration for small batches.This is probably why they give you the instructions in terms of 100 gallons ... it would be tough to measure 0.21 ounces accurately.


10 gallons equal how many pounds?

The weight of 10 gallons will vary depending on what substance is being measured. For water, 10 gallons would weigh about 83.3 pounds. Other substances will have different weights per gallon.


How many gallons of water does a 12 in pipe hold per 100 feet?

The volume of a cylinder is (pi) x (radius)2 x ( length) .Radius is 1/2 of the diameter.Radius of a 3-inch pipe is 1.5 inches.1 foot = 12 inches1,000 feet = 12,000 inches1 gallon = 231 cubic inchesVolume = (pi) x (1.5)2 x (12,000) = 84,823 cubic inches = 367.2 gallons (rounded)


How many gallons of water is in a 2.5 inch fire hose fifty feet long?

A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.