Wiki User
∙ 14y ago39.3700787
Wiki User
∙ 14y agoA meter is equal to approximately 39.37 inches. Therefore, a parking meter that is one meter high would be approximately 39.37 inches high.
1.32 meters is equivalent to 51.97 inches. To convert meters to inches, you can multiply the meter measurement by 39.37 (which is the factor for the conversion).
1 meter 67 centimeters is equivalent to 167 centimeters in total height.
A meter is a measurement of length - one dimension. A cubic meter is a measure of volume - three dimensions. A cubic meter would be a space one meter wide x one meter deep x one meter high. In effect a cube.
One gallon of water is equal to approximately 231 cubic inches. Therefore, 400 gallons of water would measure approximately 92,400 cubic inches. To find the height in inches, divide the total cubic inches by the surface area of the container the water is in.
83 cm is approximately 32.68 inches and 204 cm is approximately 80.31 inches. To convert these measurements into feet, you would divide the inch measurements by 12. This would mean the measurements are approximately 2.73 feet wide and 6.69 feet high.
39.37 inches high.
I found a parking meter that is 50 inches high and weighs 256 pounds.
3 feet 11.2 inches.
80 inches
1000mm =1 meter 1 meter =39.37 inches therefore inches =39.37*.855=33.66 inches which is 2 ft 9 an 2/3 inches
1 metre = 39.37 inches
A cubic meter is about 7 cubic feet larger than a cubic yard. A cubic yard is 36 inches high, wide and long. A cubic meter is 39.37 inches high, wide and long.
A desk is about a meter high so, use the meter.There'd be nothing wrong with using centimeters but decimeters are rarely used. Since these are both derived from the base unit of meter, the best answer would be meter.
The standard setting for Men's 110 Meter High Hurdles is 39 inches.
Men's - 110m hurdles are 42 inches high - 400m hurdles are 36 inches high Women's - 100m hurdles are 33 inches high - 400m hurdles are 30 inches high
1.32 meters is equivalent to 51.97 inches. To convert meters to inches, you can multiply the meter measurement by 39.37 (which is the factor for the conversion).
Unfortunately, you'll have to be more specific. If you are referring to a Newton meter (instrument), a high meter reading would indicate a high force or weight (not mass). Alternatively, a Newton-meter could be a Joules (a unit of work) or, if the force is applied as a rotational force, a Newton meter would be a unit of torque.