The area of the room is not enough information to determine its width. Based on the normal usage, which implies that the width is less than the length, the only assertion possible is that the width is at most sqrt(185) ft , that is, at most 13.6 feet.
The square footage of a 20x18 room is 360 square feet. This can be calculated by multiplying the length (20 feet) by the width (18 feet).
To find the square feet of carpet for a room, measure the length and width of the room in feet. Then, multiply the length by the width to get the square footage. For example, a room that is 10 feet by 12 feet would require 120 square feet of carpet.
You must convert each measurement (length and width) from whatever unit of measurement you have used into feet; then multiply the length (in feet) times the width (in feet). The result will be the area in square feet.
396 square feet. Just multiply length by width - the answer is the square footage.
Multiply width by length to get the area. The answer would be 112 square feet.
You don't measure the length and width in square feet. Square feet is an area. You measure the length and width in feet, then multiply them to get the area in square feet.
Area is length times width. If the length and width are measured in feet, the area will be in square feet.
area = length x width width = area/length 16/8 = 2 feet
Area = Length * Width So Length = Area / Width Length = 132/1q = 132/q feet
Square feet is a measure of area. To figure out how many square feet there are in a square or rectangle, you would simply multiply the width by the length.For example, if the width is 5ft and the length is 7 ft, then the area would be 5x7 = 35 square feet.
Area = length * width378 ft2 = 27W14 feet = width===========
If the room is rectangular - the usual case - multiply the length times the width. If length and width are in meters, the area will be in square meters; if length and width are in feet, the area will be in square feet, etc.
On any rectangular area: Area = (Length) x (Width) Length = (Area) / Width) Length = (800) / (20) = 40 feet
area = width x length width = area/length width = 925 sq ft/37 ft width = 25 ft
A square with an area of 99 acres has a length and width of 2,077 feet.
Length*Width = Area So Length = Area/Width = 180/12 = 15 feet.
That would be 196 square feet. If you are measuring a square or rectangle area, you can multiply length times width; Length x Width = Area.