Wiki User
∙ 14y agoThat would depend on the wall thickness. 5" pipe has a nominal outside diameter of 5.563 inches (141.3mm) and wall thicknesses between 0.109" (Sch 5) (2.77 mm) and 0.625" (Sch 160) (15.88 mm). Assuming the mile (1609 meters) of pipe is Sch 40 with wall thickness of 0.258 " (6.55 mm)
Calculating in metric units (liters/decimeters)
pi * r2 * l >> 3.1415 * 0.6412 * 16093 = 20773 liters = 20.8 m2 = 5487 US gal
Wiki User
∙ 14y agoTo find the volume of water that the pipe can hold, you first need to calculate the cross-sectional area of the pipe using its diameter (5 inches). Once you have the cross-sectional area, you can then multiply it by the length of the pipe (5280 linear feet) to determine the volume of water it can hold when full.
700 liters of water weighs approximately 700 kilograms, as the density of water is about 1 kg/liter.
A standard cord of wood is 4 feet high, 4 feet wide, and 8 feet long, equivalent to 128 cubic feet. A full-sized pickup truck bed typically has a width of around 5 feet and a length of 6 to 8 feet, so it may not fit an entire cord of wood without stacking it higher than the sides of the truck bed.
A full cord of wood is a stack that measures 4 feet high, 4 feet wide, and 8 feet long, totaling 128 cubic feet of wood. A face cord is a stack that is 4 feet high and 8 feet long, but the width can vary depending on the length of the wood pieces, typically smaller than a full cord.
Water's full chemical name is dihydrogen monoxide, with the chemical formula H2O.
The cost to boil a full kettle of water depends on the energy efficiency of the kettle and the cost of electricity in your area. On average, it could cost around 2 to 10 cents to boil a full kettle of water.
5249.3438 feet is 0.9941939 miles..... about 30 feet short of a mile. A full mile is 5280 miles.
480 sq feet
A full mile is 5280 feet. A mile and a half is 7920 feet. But there are thousands of different sizes of pools, so there's no way to answer.
Answer: 5280 ' = 1609.344 m. 1609.344/50 = 32.2, so it would take 32.2 full laps to complete one mile.
700 liters of water weighs approximately 700 kilograms, as the density of water is about 1 kg/liter.
261.66
Regression :The average Linear or Non linear relationship between Variables.
36 ft is 432 inches which equals 10.9 meters assuming you mean a lap is a full lap as in both ways (there and back) across the length of the pool or 21.8 meters it will take 100/21.8 or about 5 full laps
Roughly 317.5 feet squared.
800 cubic feet of water weights roughly 49,941.52 (water volume times density.)
Assuming: an 8 inch inside diameter, 1 gallon of water weighs 8.345404 pounds, 231 cubic inches of water to the gallon, volume of cylinder = Pi * radius^2 * height volume=3.14 * 4^2 * (4000 * 12) volume = 3.14 * 16 * 48,000 = 2,411,520 cubic inches 2,411,520 cubic inches of water when full. -------------------------------------------------------------------------- A 4000 foot cylinder/pipe with an 8 inch inside diameter, if full of water, will contain 10,439.48 gallons of water weighing a total of 87,121.68 pounds or 43.56 tons.
linear integrated circuit