0
You switched the power and switch wires. There should be two sets of wires in the ceiling box. 2 black, 2 white, 2 bare. Two groups of three. The white wire going to the light is the incoming wire. The black one in that group is the power coming in. Take that black wire and connect it to the other black wire. The second black wire goes to the switch. The power comes back to the light on the white wire of that set. Connect that white wire to the black wire in the fixture. The switch should work now. That is if everyone wired the house the way it is supposed to be.
What else can I help you with?
What would cause a ceiling fan's lights and fan to stop working while the small LED on the wall switch still lights when it is switched on?
That led is only showing that there is power to the switch and/or the light and fan fixture. You would have to check the power at the fixture to determine if it is actually in the switched feed or the fan/light assembly.
Why does dimmer switch cause ceiling light to make noise?
Dimmer switches control the amount of electricity flowing to the light fixture by rapidly turning the power on and off. This rapid cycling can cause the light fixture to vibrate or emit a buzzing sound, especially if the light fixture is not compatible with the dimmer switch. Upgrading to a dimmer switch designed for the specific type of light fixture can help reduce or eliminate the noise.
What if your ceiling light does not work although there is power to the live wire?
If there is power to the live wire but the ceiling light is still not working, the issue may lie with a faulty light bulb, a bad connection between the wire and the fixture, or a defective switch. Try replacing the bulb first, then check the wiring connections and the switch to ensure they are functioning properly. If the problem persists, it may require further inspection by a professional electrician.
Where does the switched live go in a ceiling light?
The switched live wire in a ceiling light typically connects to the live terminal of the light fixture. This wire carries the electrical current and is controlled by the light switch to turn the light on and off. Make sure to turn off the power before making any electrical connections.
What is a keyless light fixture?
A keyless light fixture is a type of light fixture that does not have a switch or socket that can accommodate a light bulb. Instead, it is typically wired directly to a power source and requires a light bulb with a built-in switch for operation.
What are the best ways to install a ceiling light with a switch in a room?
To install a ceiling light with a switch in a room, follow these steps: Turn off the power to the room at the circuit breaker. Choose a suitable location for the light fixture and mark where it will be installed. Install a ceiling electrical box and run the necessary wiring to the switch location. Connect the wires from the light fixture to the wiring in the ceiling box, following the manufacturer's instructions. Install the light fixture onto the ceiling box. Install the switch in a desired location and connect it to the wiring. Turn the power back on and test the light to ensure it is working properly.
How to change a light fixture on the ceiling?
To change a light fixture on the ceiling, first turn off the power to the fixture at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling. Disconnect the wires and remove the mounting bracket. Install the new fixture by connecting the wires and securing the mounting bracket. Finally, attach the new fixture to the ceiling and turn the power back on to test it.
How to install a ceiling light fixture?
To install a ceiling light fixture, first turn off the power to the fixture at the circuit breaker. Remove the old fixture and disconnect the wires. Connect the new fixture's wires to the corresponding wires in the ceiling, usually black to black, white to white, and green or copper to the ground wire. Secure the fixture to the ceiling and turn the power back on to test the light.
How can I install a new light fixture in the ceiling?
To install a new light fixture in the ceiling, first turn off the power to the existing fixture at the circuit breaker. Remove the old fixture and disconnect the wires. Install a mounting bracket for the new fixture, then connect the wires from the fixture to the corresponding wires in the ceiling. Secure the fixture to the bracket and test that it is working properly before turning the power back on.
How do you attach a light fixture to the ceiling?
To attach a light fixture to the ceiling, first turn off the power to the fixture at the circuit breaker. Next, remove the existing fixture and disconnect the wires. Install a mounting bracket to the ceiling box, then connect the fixture wires to the corresponding wires in the ceiling box using wire nuts. Secure the fixture to the mounting bracket and attach the canopy or cover. Finally, turn the power back on and test the light.
How do I remove a light fixture from the ceiling?
To remove a light fixture from the ceiling, first turn off the power to the fixture at the circuit breaker. Next, remove the screws or bolts holding the fixture in place. Carefully disconnect the wires, noting their placement. Finally, remove the fixture from the ceiling and replace it with a new one if desired.
How can I replace a pull chain light fixture?
To replace a pull chain light fixture, first turn off the power to the fixture at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling. Disconnect the wires and remove the old fixture. Install the new fixture by connecting the wires and securing it to the ceiling. Turn the power back on and test the new fixture.
How can I install a light fixture in the ceiling?
To install a light fixture in the ceiling, first turn off the power to the area. Remove the old fixture, then attach the new fixture's mounting bracket to the electrical box in the ceiling. Connect the wires from the fixture to the corresponding wires in the ceiling, usually black to black, white to white, and green or copper to the ground wire. Secure the fixture in place and attach the cover. Turn the power back on and test the light to ensure it is working properly.
What are the installation instructions for a two bulb ceiling light fixture?
To install a two bulb ceiling light fixture, first turn off the power to the fixture at the circuit breaker. Remove the old fixture and disconnect the wires. Attach the mounting bracket to the ceiling box and connect the wires from the fixture to the corresponding wires in the ceiling box. Secure the fixture to the mounting bracket and install the light bulbs. Turn the power back on and test the light to ensure it is working properly.
How do I properly wire a ceiling light fixture?
To properly wire a ceiling light fixture, first turn off the power at the circuit breaker. Remove the old fixture, connect the fixture wires to the corresponding wires in the ceiling box (usually black to black, white to white, and green or bare to ground), and secure the connections with wire nuts. Finally, attach the fixture to the ceiling box and turn the power back on to test the light.
How can I change a light fixture?
To change a light fixture, first turn off the power at the circuit breaker. Remove the old fixture by unscrewing it from the ceiling. Disconnect the wires and remove the mounting bracket. Install the new fixture by connecting the wires and securing it to the ceiling. Turn the power back on and test the new fixture.
How is the power wired in a 3-way switch setup where the power source is located at the light fixture?
In a 3-way switch setup with the power source at the light fixture, the power is wired from the circuit breaker to the light fixture, then to the first switch, and finally to the second switch. This creates a loop that allows the switches to control the light fixture from different locations.
