0
Outside porch lamp has no box just two wires coming in black wires are tied and don't connect to fixture just the white wires what is going on here?
Wiki User
∙ 14y ago
You would have to provide more info to be certain what your problem is. Typically a black and white wire would connect to the two wires on the light fixture. The fixture should also be controlled by a switch that "breaks" the black (Hot Wire) to turn off the fixture. If you have a volt meter you can see if there is 120Volts between the black and white wires with switch on. If there is a single white wire going to fixture (Neutral), where is the "black wires tied" to. Maybe one of the black wires has broken off the fixture.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
Do you connect black wire to gold screw and white wire to silver screw in light fixture?
Yes, that is the correct connection.
When you connect earth wire in ceiling light does not work when connecting earth from light direct to earth wire coming from ceiling trips out when take earth wire out light works?
By earth wire I am assuming you mean the bare wire and that a black and white wire are connected to the light. If when you connect the earth wire and breaker trips then there is a short between black and earth. It could be a bad ground connection, an internal short in the light fixture where black wire "hot" is connected to metal on the fixture through a nick in wire.
Do you connect both wires on a pull chain switch one to black one to white?
There should be two wires in the box, black and white and possibly a bare one depending on the age of the wiring in the house. The fixture has two screws on the base. One wire goes on each screw. If there are short wires on the fixture, black to black and white to white. If there is a bare ground wire in the house box, it attaches to the body of the fixture. If there is no ground screw on the fixture, do not worry about it.
How do you wire a series of recessed lights to a single switch when the power goes to the lights first?
If you already know how to put one fixture on a 3-way, just connect white-to-white and black-to-black from one light to the next. If you're changing from a single switch to the 3-way, the exact wiring will depend on whether the power comes from the breaker box to the switch or the existing fixture. I'll assume you're starting from scratch or have the power going to the fixture. You need #15 two-wire with ground and #15 three-wire with ground romex. Run two-wire from the breaker box to the first light fixture. Pull a another two-wire from this box to switch A and a three-wire between the switches. String two-wire from the first light to the second, second to third, etc. In the first box, connect white from source to the white fixture wire and the white going to the second box; black from source to the black to switch A; and the black fixture wire to both the white to switch A and the black to the next fixture. At each of the other 5 fixtures, connect all white to white and black to black (three pair in each box except the last one). At switch A, connect the white from the fixture to the common (center) connector and the black directly to the black going to switch B. The red and white wires going to switch B are connected to the two outside connectors of switch A. At switch B, the black goes to the common connector and the red and white to the outside connectors. At each box, connect all the bare wires (second ground) to each other and to the fixture or box. Now turn the power back on. If all the connectors are tight, power should follow the black wires from source past the fixture and switch A to switch B. From there it will go through one or the other of the travellers and, if switch A is in the same position as B, up the white switch leg to the fixtures, turn on all the lights and go back to ground.
Can you run power from a light fixture to another light fixture?
Yes. Connect Black to Black, White to White and bare ground wires together.
How do you connect a White Black Green wired device to household White Black Red ground light outlet?
If there is a red wire in the fixture box it sounds like the fixture is three way switched. The travelers are coming from one of the two switches and the cable is going to the second switch.See related links below.
Troubleshooting 40 year old outside wiring to light fixture?
Yes
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
How do you wire in a pull chain switch in a bathroom light fixture?
If you are adding the pull chain to an existing fixture then the pull chain switch should have two wires. Wire nut either one to the hot wire coming in and the other to the black wire of the fixture.
Do you connect black wire to gold screw and white wire to silver screw in light fixture?
Yes, that is the correct connection.
When you connect earth wire in ceiling light does not work when connecting earth from light direct to earth wire coming from ceiling trips out when take earth wire out light works?
By earth wire I am assuming you mean the bare wire and that a black and white wire are connected to the light. If when you connect the earth wire and breaker trips then there is a short between black and earth. It could be a bad ground connection, an internal short in the light fixture where black wire "hot" is connected to metal on the fixture through a nick in wire.
Do you connect both wires on a pull chain switch one to black one to white?
There should be two wires in the box, black and white and possibly a bare one depending on the age of the wiring in the house. The fixture has two screws on the base. One wire goes on each screw. If there are short wires on the fixture, black to black and white to white. If there is a bare ground wire in the house box, it attaches to the body of the fixture. If there is no ground screw on the fixture, do not worry about it.
How do you wire 120 volt 2 bulb 8 ft?
It sounds like you are talking about a two tube eight foot fluorescent fixture. Open the fixture up and you will find a ballast that has probably two yellow wires, two blue wires, two red wires and a black and white wire coming out of it. The 120 volt supply will connect to the black and white wires that protrude out of the ballast. Black ballast to black supply and white ballast to white supply.
How do you wire a series of recessed lights to a single switch when the power goes to the lights first?
If you already know how to put one fixture on a 3-way, just connect white-to-white and black-to-black from one light to the next. If you're changing from a single switch to the 3-way, the exact wiring will depend on whether the power comes from the breaker box to the switch or the existing fixture. I'll assume you're starting from scratch or have the power going to the fixture. You need #15 two-wire with ground and #15 three-wire with ground romex. Run two-wire from the breaker box to the first light fixture. Pull a another two-wire from this box to switch A and a three-wire between the switches. String two-wire from the first light to the second, second to third, etc. In the first box, connect white from source to the white fixture wire and the white going to the second box; black from source to the black to switch A; and the black fixture wire to both the white to switch A and the black to the next fixture. At each of the other 5 fixtures, connect all white to white and black to black (three pair in each box except the last one). At switch A, connect the white from the fixture to the common (center) connector and the black directly to the black going to switch B. The red and white wires going to switch B are connected to the two outside connectors of switch A. At switch B, the black goes to the common connector and the red and white to the outside connectors. At each box, connect all the bare wires (second ground) to each other and to the fixture or box. Now turn the power back on. If all the connectors are tight, power should follow the black wires from source past the fixture and switch A to switch B. From there it will go through one or the other of the travellers and, if switch A is in the same position as B, up the white switch leg to the fixtures, turn on all the lights and go back to ground.
New ceiling fixture goes on as soon as power is back even though switch is off?
You switched the power and switch wires. There should be two sets of wires in the ceiling box. 2 black, 2 white, 2 bare. Two groups of three. The white wire going to the light is the incoming wire. The black one in that group is the power coming in. Take that black wire and connect it to the other black wire. The second black wire goes to the switch. The power comes back to the light on the white wire of that set. Connect that white wire to the black wire in the fixture. The switch should work now. That is if everyone wired the house the way it is supposed to be.
How do you wire a light switch with only black and red wires?
Connect the black wire to the incoming hot wire and the red wire to the out going load.
