answersLogoWhite

0

for English units, see this table

http://energy.sdsu.edu/testcenter/testhome/Test/solve/basics/tables/tablesPC/superR134a-Eng.html

(click on SI once there for SI units if needed). If you need higher pressure than 400psia or 16MPa, you will need the R143a superheated vapor chart, which I can't find online. You can find tables and charts in various thermodynamics textbooks. For example, Tables in "fundamentals of engineering thermodynamics" by Moran and Shapiro; or the chart by "SUVA/DuPont" is in the appendix of the "mechanical engineering reference manual" by Lindeburg.

User Avatar

Wiki User

18y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is sub cooled vapor?

Subcooled vapor refers to a vapor that is at a temperature lower than its saturation temperature at a given pressure. In other words, it is a vapor that is in a superheated state but exists at a temperature below its boiling point at the current pressure. Subcooled vapor is not in equilibrium with its liquid state and is considered to be in a superheated state.


Is the discharge gas from the compressor a high pressure high temperature superheated vapor?

Yes, the discharge gas from a compressor is typically a high-pressure, high-temperature superheated vapor. As the compressor increases the pressure of the refrigerant or gas, it also raises its temperature, resulting in superheating if the gas is compressed beyond its saturation point. This superheated vapor is then directed to the condenser in refrigeration and air conditioning systems.


Define a superheated vapor?

A superheated vapor is a gas that has been heated beyond its boiling point at a given pressure, resulting in a temperature increase without a corresponding increase in pressure. This state occurs when the vapor is not in contact with its liquid phase, allowing it to absorb additional heat without condensing. Superheated vapors are often used in various engineering applications, such as in steam turbines, where they improve efficiency by allowing the vapor to expand and do work.


What do you need for complete specifition of superheated vapour?

To fully specify superheated vapor, you need to know the substance involved (e.g., water, steam), its pressure, temperature, and specific volume. Additionally, information on the phase state (gas), the degree of superheat, and any relevant thermodynamic properties like enthalpy or entropy may also be required.


What happens to a saturated vapor when heat is added?

When heat is added to a saturated vapor, its temperature will increase and the vapor will start to undergo phase change into a superheated vapor. This means that the vapor will contain more thermal energy than at saturation conditions, which leads to a rise in temperature without a change in pressure.

Related Questions

What is Definition of superheated vapor?

superheated vapor is a vapor that has been heated above its boiling point.


What is the only location where the refrigerant vapor is superheated?

The only location where the refrigerant vapor is superheated is in the evaporator section of a refrigeration or air conditioning system, specifically after it has absorbed heat from the space being cooled. In this section, the refrigerant transitions from a liquid to a vapor state, and if it continues to absorb heat beyond the phase change, it becomes superheated. This superheated vapor then moves to the compressor, where it is compressed to a higher pressure.


Why is the superheated vapor from the condenser is higher than the superheated vapor going into the compressor?

becaause it was just compressed by the compressor and is the high side of the system before the tex valve


What is sub cooled vapor?

Subcooled vapor refers to a vapor that is at a temperature lower than its saturation temperature at a given pressure. In other words, it is a vapor that is in a superheated state but exists at a temperature below its boiling point at the current pressure. Subcooled vapor is not in equilibrium with its liquid state and is considered to be in a superheated state.


What is the refrigerant entering the metering or expansion device of a refrigeration system?

superheated vapor


Is the discharge gas from the compressor a high pressure high temperature superheated vapor?

Yes, the discharge gas from a compressor is typically a high-pressure, high-temperature superheated vapor. As the compressor increases the pressure of the refrigerant or gas, it also raises its temperature, resulting in superheating if the gas is compressed beyond its saturation point. This superheated vapor is then directed to the condenser in refrigeration and air conditioning systems.


What is a direct expansion evaporator?

Refrigerant enters a direct expansion evaporator as a saturated liquid vapor mix and leaves as a superheated vapor.


Define a superheated vapor?

A superheated vapor is a gas that has been heated beyond its boiling point at a given pressure, resulting in a temperature increase without a corresponding increase in pressure. This state occurs when the vapor is not in contact with its liquid phase, allowing it to absorb additional heat without condensing. Superheated vapors are often used in various engineering applications, such as in steam turbines, where they improve efficiency by allowing the vapor to expand and do work.


What information can be found in the subcooled R134a table?

The subcooled R134a table provides data on the properties of R134a refrigerant at temperatures below its saturation point, including specific volume, enthalpy, entropy, and other thermodynamic properties.


What are the kinds of water vapor?

there are two types of water vapor it is a evaporation and condensation


What do you need for complete specifition of superheated vapour?

To fully specify superheated vapor, you need to know the substance involved (e.g., water, steam), its pressure, temperature, and specific volume. Additionally, information on the phase state (gas), the degree of superheat, and any relevant thermodynamic properties like enthalpy or entropy may also be required.


Where in the world is the highest percentage of water vapor?

In the natural environment, probably in geysers which, because of their pressure, contain superheated steam.