let weight of brick = x
so x = 1 lb + x / 2 lb
multiply both sides by 2
so 2x = 2 lb + x lb
subtract x from each side
x = 2 lb
so 1 brick weighs 2 lb
so 2 bricks weigh 4 lb
Two bricks weigh 3 pounds. Explanation: Let x be the weight of one brick. According to the information given, x = 1 + 0.5x. Solving for x, we find x = 2. Therefore, two bricks weigh 2 + 2 = 4 pounds.
Let x = the weight of one brick (pounds) x = 1 + 0.5x
x - 0.5x = 1 + 0.5x - 0.5x
x = 1
2x = 2
Two bricks weigh 2 pounds.
Half of a pound.
OK, take an average house brick (is there such a thing?) which weighs about 6 pound 8 oz (2.9K), and then using the English (long) ton which is 2240, you get approx 340 bricks to the ton I reckon -Using the US (short) ton which is 2000 pounds, there are approximately 305 bricks to the ton.As an aside, if you have a 6 yard builders skip that you are filling up you can load about 7 tons max. , that's 2380 bricks, quite few then.
To calculate the density of bricks, divide the mass of the brick by its volume. The density of bricks is typically around 1,500-2,000 kg/m^3 depending on the type of material used.
An average human produces about 0.3-0.5 pounds of poop per day. Assuming an average weight of 0.4 pounds per day, over the course of a lifetime (let's say 80 years), you would produce around 11,680 pounds of poop. Given that a standard brick weighs around 4.5 pounds, you could make a wall approximately 2,600 bricks long.
Bricks are gaseous.
The Thing Made Of Stones Are Called Bricks
200 bricks will weigh 900 pounds in total, since each brick weighs 4.5 pounds.
The weight of 100 bricks can vary depending on their size and material. On average, a standard clay brick weighs about 5 pounds. Therefore, 100 bricks would weigh around 500 pounds.
The weight of a cube of brick will vary depending on the size and density of the brick. On average, a standard brick weighs approximately 4.5 pounds. You can calculate the weight of a cube of brick by multiplying the weight of a single brick by the number of bricks in the cube.
126 bricks equals one strap of brick.
Aerocon bricks are light weight bricks, the bricks are casted leaving the pores in the brick, which reduces the unit weight of brick, which inturn reduces the weight coming on the structure.- K @ $ !civil engineering - GITAM UNIVERSITY
The weight of brick chips in a cubic yard can vary depending on the size and density of the bricks. On average, a cubic yard of brick chips may weigh around 2,000 to 2,700 pounds. It would be best to check with a supplier for the specific weight of the brick chips you are using.
About 4.5 pounds for "average" US brick (but there is no set size for bricks in the US, so weight varies depending on actual size and clay type)
Depends on the bricks composition.
Depends on the density of the bricks you are referring to. If one brick was one cubic meter and weighed a ton then your answer would be 1. Similarly if it took 3424 bricks to weigh a ton and they were all half a cubic meter, then your answer would be 1712 cubic meters. You require more information.
They weigh the same.
No bricks are made out of bricks.
8 pounds