0
What else can I help you with?
Which component is reduced during the electrolysis of brine?
water
What is the name of the apparatus used to electrolysis of water?
The apparatus used for electrolysis of water is called an electrolysis cell or electrolytic cell. It typically consists of two electrodes connected to a power source, a container of water containing an electrolyte, and a mechanism to collect the gases produced during electrolysis.
How long does it take to produce 0.02l of oxygen during electrolysis of water?
The time required to produce 0.02 liters of oxygen during the electrolysis of water depends on several factors, including the current applied, the efficiency of the electrolytic cell, and the temperature. Generally, using a typical current of around 1 ampere and assuming ideal conditions, it may take several minutes to produce this volume of oxygen. For more precise calculations, specific parameters of the electrolysis setup would need to be considered.
What is the relationship of volume of water to its mass?
The volume of water is directly proportional to its mass. This means that as you increase the volume of water, the mass will also increase proportionally. Conversely, if you decrease the volume of water, the mass will decrease accordingly.
Is it harmful to drink water that has been in the electrolysis of water?
Drinking water produced through electrolysis is generally safe, as it is filtered and treated during the process. However, it's important to ensure the electrolysis equipment is properly maintained and the water source is clean to prevent any potential contamination.
Which component is reduced during the electrolysis of brine?
water
When body is immersed in water then water equal to the volume explain this?
The water displaced by the body is equal to its volume.
What is the volume of water equal to 38cm3?
The volume of water equal to 38cm3 is 38ml. 1cm3 is equivalent to 1ml in volume.
What is the name of the apparatus used to electrolysis of water?
The apparatus used for electrolysis of water is called an electrolysis cell or electrolytic cell. It typically consists of two electrodes connected to a power source, a container of water containing an electrolyte, and a mechanism to collect the gases produced during electrolysis.
What is equal to the volume of water an object displaces?
The volume of water an object displaces is equal to the volume of the object itself, as stated by Archimedes' principle. This principle explains that the volume of fluid displaced by an object immersed in a fluid is equal to the volume of the object.
Why sulfuric acid added to water during electrolysis?
Sulfuric acid is added to water during electrolysis to increase the conductivity of the solution. This helps ions move freely in the solution and facilitates the electrolysis process by allowing the flow of electric current. It also helps in stabilizing the pH of the solution.
During water electrolysis does the water have to be warm?
No, water does not have to be warm for electrolysis to occur. However, increasing the temperature can help improve the efficiency of the process by reducing the energy required for the reaction to take place.
What is volume of the displaced wate is equal to?
The volume of water displaced is equal to the volume of the object submerged in water. This is known as Archimedes' principle, which states that the buoyant force acting on an object is equal to the weight of the water displaced by the object.
Why does using sodium bicarbonate as electrolyte when performing electrolysis of water produce less than one half volume oxygen for every one volume of hydrogen produced?
Because the electrolysis of water reaction always produces twice as much hydrogen (by volume or by mole) as they do oxygen. H2O(l) -> H2(g) + 1/2 O2(g)
How can an irregular volume be measured?
By placing the object in water and the volume of water displaced is equal to the volume of the object immersed
How do you use submerging method to calculate volume?
The volume of water displaced is equal to the volume of the object submerged into the water
How does the volume of a fully submerged object compare with the volume of water displaced?
The volume of a fully submerged object is equal to the volume of water it displaces. This is known as Archimedes' principle, which states that the buoyant force acting on an object is equal to the weight of the water displaced by the object.
