"Cranking Amps" are the amount of amps required for the starter to crank the engine.
Automobile batteries are measured in "cold cranking amps." That's the amperage capacity of the battery in cold weather.
200ma is .200 amps or .2 amps
To convert high voltage (HV) amps to low voltage (LV) amps, you can use the formula: HV amps = LV amps x (LV voltage / HV voltage). By rearranging the formula, you can calculate LV amps by dividing HV amps by the ratio of HV voltage to LV voltage.
3000 milliamps is equal to 3 amps. To convert milliamps to amps, you divide by 1000.
To convert VA to amps, you can use the formula Amps = VA / Volts. In this case, Amps = 140 VA / 240 V = 0.5833 Amps.
The term given to breaking of long hydrocarbon chains is "cracking." Cracking is a process that breaks down complex hydrocarbons into simpler molecules like light hydrocarbons such as ethylene, propylene, and butylene.
Cracking is correct, as in cracking an egg.
a gmc battery can be from 500 to 1000 cracking amps. if you are using a 2 or 6 amp charger the 6 amp will charge faster than the 2 amp.
I hope you have a cracking time.The glass began cracking under the weight.Stop cracking your knuckles.
Get Cracking was created in 1943.
no
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Cracking Up was created in 2004.
Cracking India was created in 1991.
Cracking Pearlymussel was created in 1820.
Thermal CRacking is caused by heat while catalytic cracking is not caused by heat
0.35897 amps = 0.35897 amps.
200ma is .200 amps or .2 amps