0
What else can I help you with?
Which of the two types of combustion are the blue and the yellow flame?
The blue flame represents complete combustion, where there is sufficient oxygen for the fuel to burn entirely, resulting in a hotter flame and fewer pollutants. In contrast, the yellow flame indicates incomplete combustion, where there is insufficient oxygen, leading to a cooler flame and the production of soot and other pollutants. This difference in combustion efficiency affects both heat output and environmental impact.
Does a roaring flame heats water faster than two quiet flames?
It depends on the total energy supplied: if the "roaring" flame burns (say) less gas than the two "quiet" flames, the two flames will heat faster.
Why do you have to use the yellow flame when not using the Bunsen burner?
The yellow flame indicates incomplete combustion, which produces soot and carbon monoxide. When using other types of burners, it's important to adjust the air-fuel mixture to achieve a blue flame for complete combustion, generating more heat and less harmful byproducts.
What causes the Bunsen burner flame to be noisy?
There are actually two flames that appear one is yellow & other is blue. And the blue flame makes more noise than the yellow.I think it is the sound of air rushing through the vents to get to the flame. The reason you get the yellow flame is that the gas is not burning completely. It is when you open up the vents that the flame is adjusted to blue.
There are two types of gametes Which are the names of these two types?
Eggs and sperm
What kind of flame are produced by the Bunsen burner?
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
What are the two kinds of flames produced by Bunsen burner?
The two kinds of flames produced by a Bunsen burner are the luminous flame (yellow flame) and the non-luminous flame (blue flame). The luminous flame is cooler and produces soot, while the non-luminous flame is hotter and ideal for heating and sterilizing.
How many different types of flame can a Bunsen burner produce?
A Bunsen burner can produce two main types of flames: the luminous flame and the non-luminous flame. The luminous flame, which is yellow and produces soot, occurs when the air supply is restricted, leading to incomplete combustion. The non-luminous flame, which is blue and hotter, occurs when the air supply is increased, allowing for complete combustion. Adjusting the air supply enables the user to switch between these flame types depending on the desired application.
What are the types of flame the Bunsen burner produces?
3
What types of flame are obtained in oxy-acetylene gas welding?
When the correct amount of Oxygen is mixed with the Acetylene a NEUTRAL flame is produced. Less than that amount produces a CARBURIZING flame. Too much Oxygen creates an OXIDIZING flame. Most welding/cutting is done with a NEUTRAL flame but all flame adjustments have their purpose.
Which of the two types of combustion are the blue and the yellow flame?
The blue flame represents complete combustion, where there is sufficient oxygen for the fuel to burn entirely, resulting in a hotter flame and fewer pollutants. In contrast, the yellow flame indicates incomplete combustion, where there is insufficient oxygen, leading to a cooler flame and the production of soot and other pollutants. This difference in combustion efficiency affects both heat output and environmental impact.
Is there a flame at the top of a Bunsen burner?
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
Why does a candle flame go out with types of lids?
When you place a lid over a candle flame, it cuts off the supply of oxygen necessary for the flame to burn. Without oxygen, the combustion process cannot continue, leading to the flame going out.
How many layers does the flame have?
The hottest flame has an excess of oxygen and has two zones or cones. A lower-temperature flame, meanwhile, has three zones.
What are the three types of acetylene welding flames?
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
Is there a plate that powers fire types in Pokemon pearl?
Yes; the flame plate.
What does the flame colour prove?
it shows the features of different types of organic salts
