0
What else can I help you with?
How many inches is 725 mm?
725 mm / 25.4 = 28.5433 inches
What is the bolt pattern for a 1966 mercury comet?
The bolt pattern for a 1966 Mercury Comet is 5x4.5 inches (5x114.3 mm). This means there are 5 lugs or bolts on the wheel hub and the distance between each stud measured in a circular pattern is 4.5 inches.
What is 28 inches by 52 inches in mm?
28 inches is equal to 711.2 mm and 52 inches is equal to 1320.8 mm. Therefore, 28 inches by 52 inches is 711.2 mm by 1320.8 mm.
210 mm equals how many inches?
210 mm = 8.26772 inches. 1 mm is 0.0393701 inches.
What does 30.6 mm equal in inches?
30.6 mm is 1.2 inches
What mm is a 4.75 bolt pattern?
1 inch = 25.4 mm 4.75 inches = 120.65 mm
Is 5x100 bolt pattern the same as 5x4.5?
No, a 5x100 bolt pattern is not the same as a 5x4.5 bolt pattern. The first number, "5," refers to the number of bolt holes, while the second number indicates the distance between the bolt holes in inches or millimeters. Specifically, 5x100 has a distance of 100 mm, whereas 5x4.5 has a distance of 4.5 inches (approximately 114.3 mm). Therefore, they are not interchangeable.
What is the bolt pattern for a 1972 Plymouth Scamp?
The bolt pattern for a 1972 Plymouth Scamp is 5x4.5 inches (5x114.3 mm). This means there are five bolt holes and the distance between the centers of the opposing holes is 4.5 inches. This bolt pattern is common among several Chrysler vehicles of that era.
What is the bolt pattern on 1969 coronet?
The bolt pattern on a 1969 Dodge Coronet is 5x4.5 inches (5x114.3 mm). This means there are five bolt holes, and the distance between the centers of two opposite bolt holes is 4.5 inches. This specification is common for many classic Chrysler vehicles from that era.
What is the bolt pattern on a 2003 z 71 avalanche?
The bolt pattern for a 2003 Chevrolet Avalanche Z71 is 6x139.7 mm (6x5.5 inches). This means it has six bolt holes, with a distance of 139.7 mm between the centers of opposite holes. The vehicle typically uses a 14 mm bolt size with a thread pitch of 1.5 mm. Always verify with specific vehicle documentation or a professional for precise fitment.
What is the bolt pattern on a 1970 ford torino?
The bolt pattern on a 1970 Ford Torino is 5x4.5 inches (5x114.3 mm). This means it has five bolt holes, and the distance between the centers of two adjacent bolt holes is 4.5 inches. This pattern is common among many Ford vehicles from that era.
2013 dodge durango bolt pattern?
The bolt pattern for a 2013 Dodge Durango is 5x127 mm (5x5 inches). This means there are five bolt holes, and the distance between the centers of two adjacent holes is 127 mm. When selecting wheels, it's important to ensure they match this bolt pattern for proper fitment.
What is the bolt pattern on a 2013 ford explorer?
The bolt pattern on a 2013 Ford Explorer is 5x114.3 mm (5x4.5 inches). This means there are five bolt holes, and the distance between the centers of two opposite bolt holes is 114.3 mm. It's important to use wheels that match this specification for proper fit and safety.
What is the bolt pattern for a 2007 dodge NITRO?
The bolt pattern for a 2007 Dodge Nitro is 5x114.3 mm (5x4.5 inches). This means there are five bolt holes, and the distance between the centers of the holes is 114.3 mm. When selecting wheels, it's important to ensure they match this specification for proper fitment.
What is the bolt pattern on a suzuki sidekick 1995?
The bolt pattern on a 1995 Suzuki Sidekick is 5x139.7 mm (5x5.5 inches). This means there are five bolt holes, and the distance between the centers of two opposing holes is 139.7 mm. Additionally, the wheel's center bore is typically 60.1 mm, and the recommended wheel lug nut size is M12x1.5.
What is the bolt pattern of a 2000 Corvette?
The bolt pattern of a 2000 Corvette is 5x120.7 mm (5x4.75 inches). This means there are five bolt holes, and the distance between the centers of two opposite holes is 120.7 mm. It's important to ensure that any replacement wheels match this specification for proper fitment.
What is difference between 139.7 mm and 5.5 inches?
Nothing - they are both the same measurement. One is metric - the other is imperial.
