0
Still curious? Ask our experts.
Chat with our AI personalities
Ross
Fran
ViviMCB stands for Miniature Circuit Breaker, which is a type of electrical switch that automatically disconnects a circuit in case of an overload or short circuit. DP stands for Distribution Point, which refers to a location where multiple connections from a central source are distributed to different devices or equipment.
Add your answer:
Earn +20 pts
Is mcb a halogenated hydrocarbon?
yes. MCB is mono chloro benzene and has one halogen (chloro) attached to the benzene ring.
What rating of MCB is required for an immersion heater?
An immersion heater typically requires a dedicated circuit with a Miniature Circuit Breaker (MCB) rated at 16A or 20A, depending on the power rating of the heater. It is recommended to consult with a qualified electrician to determine the appropriate MCB rating based on the specific requirements of the immersion heater.
Make motor circuit how to calculate range of MCB?
To calculate the range of an MCB (Miniature Circuit Breaker) for a motor circuit, you need to consider the full load current of the motor in amps and select an MCB with a rating above this value to ensure it can handle the starting current and any potential overload conditions without tripping. It is recommended to select an MCB that is rated at least 1.5 times the full load current of the motor to provide a safety margin and prevent nuisance tripping.
What is the DP ranges of cellulose?
The degree of polymerization (DP) range of cellulose varies depending on the source. Typically, cellulose can have a DP range of 1000 to 10,000 glucose units in a polymer chain. High DP cellulose is found in natural cellulose fibers like cotton, while lower DP cellulose is found in sources like wood pulp.
Do you need 15A MCB for 15A socket outlet?
Yes, it is recommended to use a 15A miniature circuit breaker (MCB) for a 15A socket outlet to ensure proper protection against overcurrent situations. Using a matching MCB helps safeguard the outlet and connected devices from potential electrical hazards.
