0
What is the Volume of a trapezium with an area of 43.2m and a depth of 2m in KL?
Wiki User
∙ 15y ago
Area multiplied by the depth 43.2 * 2 = 86.4 metres cubed 1 metre cubed = 1KL 86.4 metres Cubed = 86.4KL
Wiki User
∙ 15y ago
The term "trapezium" typically denotes a 2D geometric shape, so it does not have volume. If you meant a three-dimensional trapezoidal prism with a base area of 43.2 m² and a height of 2 m, then the volume can be calculated by multiplying the area by the depth. In this case, the volume would be 86.4 cubic meters.
Add your answer:
Earn +20 pts
How many cubic meters in an area 59446 square meters with a depth of 7.5cm?
To find the volume, first convert the depth to meters (7.5cm = 0.075m). Then multiply the area (59446 sqm) by the depth (0.075m) to get the volume in cubic meters. So, the volume is 4458.45 cubic meters.
How do you figure out the number of cubic feet of sand in square feet?
To determine the number of cubic feet of sand in square feet, you would need to know the depth of the sand in feet. Once you have the depth, you can multiply the area in square feet by the depth in feet to calculate the volume in cubic feet. This is done by using the formula Volume = Area x Depth.
A rectangular water reservoir contains 42000 liters of water Find the depth of the water in the reservoir if its base measures 6m by 3.5 m?
The volume of the rectangular reservoir is given by the formula Volume = base area * depth. Since the volume is 42000 liters and the base area is 6m * 3.5m, you can calculate the depth by dividing the volume by the base area. So, depth = Volume / Base area. Substituting the given values, depth = 42000 liters / (6m * 3.5m) = 2000/7 ≈ 285.71 meters.
How many cubic liters in 1 hectare?
A hectare is a unit of area, not volume. It measures 10,000 square meters. If you want to convert the area of a hectare to volume, you would need to know the depth of the space you are considering.
What is the volume if water spills on to the floor?
The volume of water spilled on the floor would depend on how much water was present before the spill, the size of the spilled area, and the depth of water that was spilled.
What is the volume of a trapezium a5.80 b6.50?
A trapezium is a 2-dimensional shape and so has no volume. If you were thinking of area, there is not enough information to answer.
What is the volume and area of an isosceles trapezium?
The area of a trapezium is given by 0.5*(a+b)*h where a and b are the lengths of the parallel sides and h is the vertical distance between them. The fact that the trapezium is isosceles does not matter. A trapezium is a 2 dimensional object and so it has no volume.
How do you write a formula for volume equals area x average depth?
Volume= surface area (length x width) x depth re arrange to surface area= depth= Volume/Area Area= Volume/Depth
How do you figure out the volume of a local lake if you know the depth and area?
The volume could be defined as the area multiplied by the depth. However, it has to be the average depth.
What is the equation for volume of 3D trapezium?
The volume is the Area multiplied by thickness (if the thickness is constant). Area = 1/2 ((a+b)*h) a = the base length b = the top length h = the height (constant) t = the thickness (constant) Volume = Area*t Please note that a trapezium and a trapezoid are defined differently in England and the USA. In England the trapezium has the base and top parallel and the area calculation above is for that definition but the area calculation for a trapezoid is different. The volume will still be Area*t.
Volume of a trapezium?
None but if you mean area it is: Area measured in square units = 0.5*(sum of parallel sides)*height
How do you mesure the volume of a area?
"Area" is an amount of flat surface. It has no volume. If the area is the bottom of a tank, then the volume of the substance in the tank is the area multiplied by the depth.
How do you determine the Volume of water based on area?
You cannot. Area is a 2-dimentional concept and volume is 3-dimensional. Unless you know the depth (or average depth) you cannot determine the volume.
Formula for volume of 3D trapezium?
volume of trapezium = 1/2* (a1+a2)*h* length where a1,a2 are the base areas respectively and h is the height its a good formula but here is a easier one 1/2*(Area of top + Area of bottom)*Height*lenght
How much water is an 25cm of rain per square meter?
volume = depth x length x width or volume = depth x area Your area is 1m² and your depth is 25cm or 0.25 m so.... Volume = .25m x 1m² = .25 m³
How do you calculate the volume of trapezium footing?
Not sure exactly what you want but our garage was built a few years ago with a trapezium base (to fit the land space available to the side of our house). The footings were a fairly normal trench style with deeper parts at the corners and under the rear doors' pillars location (our garage is about 9 ft wide at the front but about 18 ft wide at the back). The volume of these footings were the volumes of the cuboids along each side plus the volume of the corners - the slight non-90o corners makes little difference in the amount of concrete that has to be ordered. For the slab on top, its volume is the area of the trapezium times the depth of the slab (all in the same units): volume_slab = (12 x sum_of_parallel_sides x perpendicular_distance_between_those_parallel_sides) x depth_of_slab If you have trapezium shaped footings, then I guess you have a footing with a trapezium cross-section: use the volume_slab formula above with appropriate choices for the parallel sides (of the trapezium) and the depth_of_slab would be the length_of_footing.
What is the formula for calculating the area of a trapezium?
area of trapezium=1/2{a+b}h
