Wiki User
∙ 13y agoOil is measured in barrels (drums), equating to 42 US gallons.
Wiki User
∙ 13y agoThe standard filling capacity of an oil drum in US gallons is 55. Make sure the drum is labeled accordingly to avoid overfilling or underfilling.
55 Imperial gallons = 250 L55 US gallons = 208.2 L
There are 128 fluid ounces in a gallon. Therefore, a 55 gallon drum would contain 7,040 fluid ounces (128 * 55).
A 150-gallon drum contains 0.0036 gallon per cubic inch.
Leaving room in the drum allows for expansion of the crude oil caused by fluctuations in temperature during shipment and storage. This extra volume prevents spills and ensures safety during transport.
There are approximately 208.2 liters in a 55 gallon drum.
That's the capacity - 55 gallons.That's the capacity - 55 gallons.That's the capacity - 55 gallons.That's the capacity - 55 gallons.
The drum has a capacity of 55 gallons. We have no way of knowing how many gallons are actually in it at any particular time. For all we know, it may be empty, and you may be just trying to trick us.
The standard industrial oil (or barrel) drum has a capacity of 200-liters. In United States gallons (gal) one barrel holds 55-gal.
A drum is usually 50 gallons
Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.
The unit weight of sand/soil is 105 lbs/cu ft1-gallon (dry) is equivalent to 0.156 cu ftSo a 55-gallon drum has a capacity of 55*0.156 = 8.58 cu ftSoil unit weight * drum capacity cu ft = 105*8.58 = 900.9 lbs
A 55-gallon drum equates to about 7.35 cubic feet of volume.
You pour four gallons into the five gallon drum, and take the ten gallon drum with the other four gallons of oil in that.
55 gallons
33 gallons
Leaving room in the drum allows for expansion of the crude oil caused by fluctuations in temperature during shipment and storage. This extra volume prevents spills and ensures safety during transport.
If that is 24 inches it would be 117.5 gallons