A #12 copper wire with an insulation rating of 60, 75 or 90 degrees C is rated at 20 amps. This holds true whether it is solid or stranded.
The current (amp) capability is determined by the wire size in gauge, rather than the voltage rating stamped on the insulation. The most basic rating is 20 Amps for 12 gauge and 15 Amps for 14 gauge wire; however, it can get more complex than that for long runs of wire or for wires run through conduit with other wires. Hire an electrician if this sounds bewildering.
The ampacity or amp rating of all wire is rated by the size of the wire. NM (non-metallic sheathing) wire is no different. In household wiring 14 gauge wire must go on a 15 amp breaker/ 12 gauge goes on a 20 A and 10 gauge goes on a 30 Amp.
The amp size of a wire is determined by its gauge, not the number of wires. An 8-gauge wire is typically rated for around 40-60 amps, depending on the type and insulation of the wire.
No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.
10
The current (amp) capability is determined by the wire size in gauge, rather than the voltage rating stamped on the insulation. The most basic rating is 20 Amps for 12 gauge and 15 Amps for 14 gauge wire; however, it can get more complex than that for long runs of wire or for wires run through conduit with other wires. Hire an electrician if this sounds bewildering.
The recommended gauge of wire for a 50 amp circuit is typically 6 AWG (American Wire Gauge) for copper wire.
The recommended gauge of wire for a 30 amp circuit is typically 10 AWG (American Wire Gauge).
The recommended wire gauge for a 30 amp circuit is typically 10 AWG (American Wire Gauge).
The recommended gauge for a 50 amp wire installation is typically 6 AWG (American Wire Gauge).
The recommended gauge of wire for a 60 amp circuit is typically 6 AWG (American Wire Gauge).
The recommended gauge wire for a 40 amp circuit is typically 8 AWG (American Wire Gauge).
The amp rating for 18 gauge wire is typically around 16 amps.
The amp rating for an 18 gauge wire is typically around 16 amps.
A 30-amp circuit breaker is typically suitable for 10-gauge wire.
The appropriate wire gauge size for a 40 amp circuit is typically 8 AWG (American Wire Gauge).
The appropriate wire gauge size for a 60 amp circuit is typically 6 AWG (American Wire Gauge).