0
Home distributions vary because of different factors. The type of heating in the home is the greatest variant. If the home is completely electrically heated you could see how the difference in cost could be as compared to heating the home with natural gas.
The size of the service is bidirectionally proportional to the cost of construction of the service. Higher amperage equipment is more expensive to purchase.
In the 60's a rough estimate used to be about a dollar an amp. A 100 amp service could be installed for about 100 dollars. Today the cost has jumped to about 10 dollars an amp for time and materials. For most new home service constructions today the panelboard is usually rated for 200 amperes.
Still curious? Ask our experts.
Chat with our AI personalities
Professor
Devin
Rene
Add your answer:
Earn +20 pts
How much does it cost to install electric power and poles to a building site with no power by PGE?
The cost to install electric power and poles to a building site with no power by Pacific Gas and Electric Company (PGE) can vary depending on factors such as distance from existing power lines, terrain, and required infrastructure. It is recommended to contact PGE directly for a cost estimate tailored to your specific site.
Why you need to remove a person in an electric shock from the electric wire using dry wooden pole?
Using a dry wooden pole to remove a person from an electric shock helps to avoid the rescuer getting electrocuted as wood is a poor conductor of electricity. The dry wooden pole acts as an insulator, preventing the electric current from passing through the rescuer's body. This method is a safer way to remove someone from an electric shock without putting oneself at risk.
Is there electric at North Pole?
Absolutely. Large generators are used to supply electrical needs.
What pole is positive?
The pole that is positive in a magnetic or electric system is the one that has a north or positive charge associated with it. In magnets, the north pole is considered positive, while in circuits, the positive pole is often associated with the direction of conventional current flow.
Why does my heating and air conditioner in my house have 3 double pole breakers - a 30 40 and 50?
In North America a two pole breaker usually represents a load that requires a 240 volt source. Larger current load appliances use 240 volts to reduce the feeder size and there by reduces the cost factor when wiring a building. Two pole 15 amp breakers are used for kitchen counter split receptacles.Two pole 20 amp breakers can be used for baseboard heating and hot water tanks.Two pole 30 amp breakers can be used for clothes dryers and some heating units.Two pole 40 amp breakers can be used for electric ranges.Two pole 50 amp breakers are not common in home wiring circuits. It might be used for an electric furnace or some other high current device.
