0
What else can I help you with?
What is the cable size for a 26kw induction motor 50metre run for cable 415v?
For a 26kW, 415V induction motor with a 50m cable run, you would typically need a cable size of at least 6mm^2 to ensure proper voltage drop and current carrying capacity. However, it is always recommended to consult local electrical codes and standards or a licensed electrician to determine the exact cable size needed for your specific installation.
What is the size of SARS virus?
The SARS virus is approximately 100-160 nanometers in size.
In a commercial building What is the maximum amp load you can install in a 200 amp load center?
In a 200 amp load center, you should not exceed 80% of the panel's capacity to ensure safety and prevent overloading. Therefore, the maximum amp load you can install would be 160 amps. It's important to consult with a licensed electrician to determine the actual load requirements for the building.
How many kWh does Toronto use?
With 2.8 million people and an average Canadian load of 2.5 kW per person (one of the highest in the world), the average Toronto load is about 7 Gigawatts, which is about 160 GWh each day, or 160,000,000 kWh per day.
In motor unit summation how many motor units are required to lift weight of 160 and 80?
The amount of motor units that is needed to lift 160 pounds will be greater that the number required when lifting 80 pounds. This is due to the nervous system reading the situation and determining the number of units required. The smaller the muscle, the more delicate the control can be.
What is the wire size for 160 ampere load?
For a typical use it would be 1/0 (one ought) wire in copper.
What is the cable size for a 26kw induction motor 50metre run for cable 415v?
For a 26kW, 415V induction motor with a 50m cable run, you would typically need a cable size of at least 6mm^2 to ensure proper voltage drop and current carrying capacity. However, it is always recommended to consult local electrical codes and standards or a licensed electrician to determine the exact cable size needed for your specific installation.
What is the starter size Amps for 45KW 3Phase AC Motor connected to the pump?
160 Amp. MCCB 45 KW Contactor (67.5-112.5) Thermal Over Load
How many DS-160 forms are required for a family applying for a visa?
One DS-160 form is required for each individual family member applying for a visa.
How many miles is it from Minneapolis mn to cabel wi?
about 160 miles to Cable.
What size cable used for 180 distance 160 amperee current in 3 phase supply?
For a 180-meter distance with a 160 ampere current in a three-phase supply, you would typically use a larger cable size to minimize voltage drop and ensure safety. A common choice would be a 35 mm² or 50 mm² copper cable, depending on the acceptable voltage drop and specific installation conditions. It's essential to consult local electrical codes and standards to confirm the appropriate size based on factors like insulation type and installation method. Always consider factors such as ambient temperature and grouping of cables as well.
What is the size of 160 grams of aluminum?
About 3 ounces
Required pass mark for ba economics in calicut university?
160
How many motor units are required to lift 160 lbs?
4
How big is a lot size of 160 x 150?
A lot size of 160 x 150 refers to a rectangular area with dimensions of 160 feet by 150 feet. To calculate the total area, you multiply the two dimensions: 160 feet × 150 feet, which equals 24,000 square feet. This size is often used in real estate to describe a parcel of land.
If your waist is 36 inches what size would you wear?
This is incorrect, the answer is that every woman is different. I am 5'4 and weigh 160 pounds. I recently lost 20 pounds, I went from a size 14 to a size 8 at 160 pounds.
What percent of 161 is 70?
Required percent = (70/160)x100% = 43.75%
