The Full load current of that amp is approx. 17A, but you base you fuse size between the Full load current of your load and the current carrying capacity of the supply cable, if the size or the CCC of the cable is unknown, I would recommend sticking as close to the FLC as possible
To determine the fuse size for a 200-watt McKinley amp, you need to divide the power rating (200W) by the voltage of the amplifier. For example, if the amp operates at 12V, the fuse size should be around 16.67 amps (200W รท 12V). It's recommended to use the next higher standard fuse rating to ensure proper protection.
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
No, it is not alright to replace a 180 watt DLP TV bulb with a 200 watt bulb. You should only use the OEM rated size/wattage for your TV.
The value of a Crunch 200 watt amp can vary depending on its condition, age, and market demand. On average, a used Crunch 200 watt amp in good working condition might sell for around $50 to $100, but prices can fluctuate.
A 100-watt electric bulb consumes 200 watt-hours of energy in two hours (100 watts x 2 hours = 200 watt-hours).
To calculate the total watt-hours of a battery bank, multiply the ampere-hours (Ah) by the voltage (V) of the batteries. So, for a 200 Ah 12V battery, the total watt-hour capacity would be 200 Ah * 12 V = 2400 watt-hours.
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
No, it is not alright to replace a 180 watt DLP TV bulb with a 200 watt bulb. You should only use the OEM rated size/wattage for your TV.
200 Watt Panel
The equation that you need to use is I = W/E. Amps = Watts/Volts. As you can see there is no voltage stated but when you obtain the voltage value use it in the equation.
The formula you are looking for is Amps = Watts divided by Volts. Once you find the amperage you can decide as to the size of a fuse you should use. Remember that fusing protects the conductors of the circuit and not the load of the circuit. A #14 wire is rated at 15 amps and can legally be loaded only to 12 amps.
it is 200 ft.
About 200 Dollars
The rhyming word pair for a 200-watt bulb is "dub" and "sub."
Mulb ;)
Yes
bright light
Bright Light.