k=.0895
To calculate the rate constant for a first-order reaction, you can use the natural logarithm function. Rearrange the integrated rate law for a first-order reaction to solve for the rate constant. In this case, k = ln(2)/(t(1/2)), where t(1/2) is the half-life of the reaction. Given that the reaction is 35.5% complete in 4.90 minutes, you can use this information to find the half-life and subsequently calculate the rate constant.
The temperature factor increases to 1.1547, approx.
Some catalysts can increase the rate of a chemical reaction at zero degrees Celsius, but not all catalysts are effective at such low temperatures. The effectiveness of a catalyst at low temperatures depends on the specific reaction and the nature of the catalyst.
If the Haber process were carried out at 100 degrees Celsius instead of 500 degrees Celsius, the reaction rate would be significantly slower. Lower temperatures would reduce the efficiency of the process, resulting in lower production rates of ammonia. It may also affect the equilibrium position of the reaction, favoring the reverse reaction.
When reactants are joined by a catalyst, they no longer have to collide with much energy to react. Thus, with the catalyst present the reaction can proceed at very low temperatures.
Yes, water has a specific heat at constant volume, known as the specific heat at constant volume (Cv). This is the amount of heat required to raise the temperature of a unit mass of water by one degree Celsius at constant volume.
Assuming the reaction is first order with respect to both HCl and Na2S2O3, increasing the temperature by 10 degrees Celsius will approximately double the reaction rate. So, you would need to heat the reaction from 25 degrees Celsius to 35 degrees Celsius to achieve this.
35 degrees Celsius to 40 degrees Celsius
Henry's law constant for Carbon Dioxide at 20 degrees Celsius is: 1,6*10^3 ATM
The temperature in Bulgaria is constant! 18 degrees Celsius!
The ionization constant Kw for water at 25 degrees Celsius is 1.0 x 10^-14.
The duration for a chemical reaction at 10 degrees Celsius can vary depending on the specific chemical and reaction. Generally, a lower temperature like 10 degrees Celsius will slow down the reaction compared to higher temperatures. It is best to consult specific reaction kinetics or experimental data for a more accurate estimation.
101.48 F = (101.48 - 32) x 5/9 Celsius = 69.48 x 5/9 Celsius = 7.72 x 5 Celsius = 38.60 Celsius
The unit for the calorimeter constant is typically Joules per degree Celsius (J/Β°C). It represents the amount of energy required to raise the temperature of the calorimeter by 1 degree Celsius.
The temperature factor increases to 1.1547, approx.
By decreasing the pressure with the volume kept constant.
98.6 Fahrenheit or 37 Celsius is the normal temperature for humans.
The value of universal gas constant in cgs is 1.985 calories per degree Celsius per mole