Warren truss bridge
plat girder
a truss bridge is the strongest
lorimerlite frameworks are the strongest for resisting compression, however octet-trusses are much stronger when resisting cantilever stresses
Sky Gate Bridge R at Kansai International Airport, Osaka,Japan, is the longest double-decked truss bridge in the world. It carries three lanes of automobile traffic on top and two of rail below over nine truss spans.
it is a flat joint
The covalent bond is the strongest.
a truss bridge is the strongest
Fink-Type Truss Bridge was created in 1857.
Truss
asymmetrical N-truss Bridge.
The type of bridges are: -truss bridge -arch bridge (truss arch bridge) -suspension bridge (suspension truss bridge) -cantilever bridge
well, for my opinion, i think a suspension bridge why: because for of all the cables support the roadway and the two towers looking things at the bottom also supports while for the truss bridge it is only trusses. and if you building a bridge then it depends on what and how you use to build it. good luck!
lorimerlite frameworks are the strongest for resisting compression, however octet-trusses are much stronger when resisting cantilever stresses
A truss bridge has the best weight to strength ratio.The triangulation of the popsicle sticks strengthens the whole bridge
Put many straws together to make it stronger
Triangels are the strongest shape so make a triple triangle design i aced it that way +++ The plank bridge is the weakest as it is just a simple beam with no central support or stiffening for the span. The other two can be designed to comparable strength for a given span, but work in somewhat different ways: the truss bridge acts as a beam stiffened by the truss frames, the arch transmits the forces from the centre to its abutments.
I want to build a truss bridge because truss bridge is most economical and his dead load is too low.
it is a hybrid between an arch bridge and truss bridge. so it is classified as an arch and truss