0
Usually when a rate of current is stated on a 3 phase board it means per phase. Therefore, you woiuld be able to draw up to 200A per phase, providing the supply authorities incomer permits this. It should be noted that, it is better to balance the phases with each other as far as the loading current goes, this will keep your max demand lower and your bills down.
Add your answer:
Earn +20 pts
What you basically want is will each phase take 26 Amps current for 15HP 3 phase 415VAC motor?
Yes, for a 15HP 3-phase 415V AC motor, each phase will draw approximately 26 Amps of current when running under normal operating conditions. This results in a total current draw of 26 Amps per phase for the motor.
How many amps are available in a three phase 225 amp panel?
In a three phase 225 amp panel, there would be a total of 225 amps available for each phase, making it a total of 675 amps for all three phases combined. This means that you could have up to 225 amps of current flowing through each phase simultaneously.
How many amps on 3 phase 225 amp panelboard each phase?
In a three-phase 225 amp panelboard, each phase will carry 225 amps. This means that the total current flowing through the panelboard is distributed evenly across the three phases, allowing for a maximum of 225 amps on each phase at a time.
What is the running amps of a 45 kW motor?
To determine the running amps of a 45 kW motor, you would need to know the voltage at which it operates. You can use the formula: Amps = (kW x 1000) / (Volts x power factor). Once you have the voltage and power factor information, you can plug them into the formula to calculate the running amps.
If a 240v circuit hsa 30 amps per phase what is the amperage 30 or 60?
If a 240V circuit has 30 amps per phase, the total amperage would be 30 amps. Since the current is measured per phase in a three-phase circuit, you would have 30 amps on each phase, totaling 30 amps.
What you basically want is will each phase take 26 Amps current for 15HP 3 phase 415VAC motor?
Yes, for a 15HP 3-phase 415V AC motor, each phase will draw approximately 26 Amps of current when running under normal operating conditions. This results in a total current draw of 26 Amps per phase for the motor.
How many amps are available in a three phase 225 amp panel?
In a three phase 225 amp panel, there would be a total of 225 amps available for each phase, making it a total of 675 amps for all three phases combined. This means that you could have up to 225 amps of current flowing through each phase simultaneously.
How many amps on 3 phase 225 amp panelboard each phase?
In a three-phase 225 amp panelboard, each phase will carry 225 amps. This means that the total current flowing through the panelboard is distributed evenly across the three phases, allowing for a maximum of 225 amps on each phase at a time.
What is the running amps of a 45 kW motor?
To determine the running amps of a 45 kW motor, you would need to know the voltage at which it operates. You can use the formula: Amps = (kW x 1000) / (Volts x power factor). Once you have the voltage and power factor information, you can plug them into the formula to calculate the running amps.
If a 240v circuit hsa 30 amps per phase what is the amperage 30 or 60?
If a 240V circuit has 30 amps per phase, the total amperage would be 30 amps. Since the current is measured per phase in a three-phase circuit, you would have 30 amps on each phase, totaling 30 amps.
If two electrical loads are connected in parallel with each other and each load draws 6 amps what is the total current of the circuit?
The total current in the circuit would be 12 amps. When electrical loads are connected in parallel, the currents add up. So if each load draws 6 amps, the total current would be the sum of both loads, which is 6 + 6 = 12 amps.
What is circuit breaker rating when electric load of a machine is 11.5 kW?
This question cannot be answered as asked. you would need to know also the voltage and phasing. Assuming we are dealing with 120-volt, single phase, 11,500 watts would be 55-running amps. Assuming we are dealing 208-volts, three phase, 11,500 watts would be 32 running amps and assuming we are dealing with 250-volt three phase, 11,500 watts would be 26.5 running amps. I hope I have answered your question.
How many amps per leg can you pull on a 50 amp 3 phase connector?
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.
What is conversion of 4.6kva to kw?
Single-phase, 2.5 amps; three-phase 1.443 amps.
How many amps does a 10kw heater draw that's 3phase 220volt?
To calculate the amperage for a 10kW heater on a 3-phase 220V system, use the formula: Amps = (kW x 1000) / (√3 x Volts). So, Amps = (10 x 1000) / (√3 x 220) = 26.18 amps per phase. Therefore, the total current drawn by the heater is 26.18 amps per phase multiplied by 3, which equals approximately 78.54 amps.
How many amperes for 3 phase 220v 5 tonner?
50 Amps Single Phase 20 Amps Three Phase
Can you run two 60 amp sources in parallel to get 100 amps out?
No, you cannot run two 60 amp sources in parallel to get 100 amps out because each source will still provide a maximum of 60 amps. When you connect them in parallel, the total current output will remain the same as the output of a single source, which is 60 amps in this case.
