Wiki User
∙ 12y ago99.84022
Wiki User
∙ 12y agoTo find the weight in grams, you can use the formula: weight = volume (in ml) x specific gravity. First, convert 4 fluid ounces to ml (1 fluid ounce is approximately 29.57 ml), which gives you about 118.28 ml. Then, multiply this volume by the specific gravity of 0.844 to get the weight in grams, which would be around 99.77 grams.
Specific gravity affects head pressure in a pump system by changing the weight of the fluid being pumped. A higher specific gravity means the fluid is denser and heavier, resulting in higher head pressure needed to overcome the increased resistance of the fluid. Conversely, a lower specific gravity would require less head pressure.
There are 8 fluid ounces in a cup, but this does not directly translate to weight (solid ounces) as it depends on the density of the substance being measured.
sure There are 2 tablespoons in 1 fluid ounce. 3.5 tbsp * ( 1 fl oz / 2 tbsp) = 3.5 / 2 = 1.75 fluid ounces this is for "fluid" ounces only. you can't convert to dry ounces unless you have the specific gravity of the stuff you're measuring
if i had to give a good answer i would say it is both because weight itself is a meausurement but it is for sure weight. Answer Fluid ounces is a measurement of volume. The weight (mass) depends on what you are measuring. 16 fluid ounces of syrup being much heavier than 16 fluid ounces of water.
6.5 ounces is 6.5 ounces, and 6.5 fluid ounces is 6.5 fluid ounces. But you cannot interchange the two: fluid ounces measure volume and ounces (avoirdupois) measure weight (mass). 1 fluid ounce of water weighs almost exactly 1 ounce. This is where the volumetric measure fluid ounces was derived from. For other liquids measured this way, they can vary greatly. The weight of 6.5 fluid ounces depends on the fluid's density.
There are 8 fluid ounces in a cup, but this does not directly translate to weight (solid ounces) as it depends on the density of the substance being measured.
There are 29.5735296 milliliters (rounded) in one US fluid ounce.There are (12 x 29.5735296) = 354.782355milliliters (rounded) in 12 US fluid ounces.Regardless of what's in those fluid ounces, or its specific gravity.Even if those fluid ounces are totally empty.
sure There are 2 tablespoons in 1 fluid ounce. 3.5 tbsp * ( 1 fl oz / 2 tbsp) = 3.5 / 2 = 1.75 fluid ounces this is for "fluid" ounces only. you can't convert to dry ounces unless you have the specific gravity of the stuff you're measuring
Gravity pressure refers to the pressure exerted by a fluid at a specific depth due to the force of gravity acting on the weight of the fluid above that point. This pressure increases with depth as the weight of the fluid column above increases. It is an important concept in understanding how fluids behave in different environments, such as in oceans or underground reservoirs.
224 US fluid ounces = about 233.1 Imperial fluid ounces.
Ounces is for weight. There are 16 ounces in a pound. Fluid ounces, however, measure capacity.
if i had to give a good answer i would say it is both because weight itself is a meausurement but it is for sure weight. Answer Fluid ounces is a measurement of volume. The weight (mass) depends on what you are measuring. 16 fluid ounces of syrup being much heavier than 16 fluid ounces of water.
They are both units of weight, but not equal in number. And be sure not to confuse this with the ounces of a liquid. Liquids in the US are measured in fluid ounces (fl oz) - which is not compatible with "dry" ounces at all. (unless you know the specific gravity of the thing you're measuring). There are 16 ounces in 1 pound. 1 kilogram weights 2.2 pounds. Therefore 1 kilogram weighs the same as 35.2 ounces.
To calculate displacer weight for level transmitter calibration, you need to consider the specific gravity of the fluid being measured, the displacer's volume, and the desired calibration points. The formula for the weight of the displacer is weight = volume x specific gravity x gravity. By inputting these values into the formula, you can determine the necessary displacer weight for calibration purposes.
6.5 ounces is 6.5 ounces, and 6.5 fluid ounces is 6.5 fluid ounces. But you cannot interchange the two: fluid ounces measure volume and ounces (avoirdupois) measure weight (mass). 1 fluid ounce of water weighs almost exactly 1 ounce. This is where the volumetric measure fluid ounces was derived from. For other liquids measured this way, they can vary greatly. The weight of 6.5 fluid ounces depends on the fluid's density.
Fluid ounces are not to be confused with ounces (mass). Pound is a measure of weight or mass. 1 ounce (mass) is approximately 28.35 grams.Fluid ounces are a volume measure, equal to approximately 29.57 milliliters.The only relation between mass and volume, would be if you have a specific substance of known density.
(Fluid ounces is a measure of volume)You need the sg (specific gravity) of the liquid (water is 1.0)Then:Fluid ounces (US) * sg of liquid * 0.0651 = poundsOr:Fluid ounces (imp) * sg of liquid * 0.06264 = pounds