Wiki User
∙ 12y ago64 tons or
64 000 kg or
140800 lbs
1 cubic meter of fresh water is 1000kg or 2200lbs. It actually differs slightly with elevation but this is the general rule. A swimming pool will not consist of pure water (chlorine, urine etc.) and these substances can have different densities than water so the result can vary a tiny bit.
Wiki User
∙ 12y agoThe weight of water is 1000 kg per cubic meter. Therefore, for a swimming pool holding 64 cubic meters of water, the weight of the water would be 64,000 kg.
To convert cubic meters to weight, you need to know the density of the substance you are measuring. Multiply the volume in cubic meters by the density in kilograms per cubic meter to get the weight in kilograms. Alternatively, you can use specific gravity if the substance is a liquid.
To convert cubic meters to tonnes, you need to know the density of the material you are measuring. Multiply the volume in cubic meters by the density in tonnes per cubic meter to get the weight in tonnes. The formula is: weight (tonnes) = volume (cubic meters) * density (tonnes per cubic meter).
A common guideline for the size of a balancing tank for a swimming pool is approximately 25-30% of the pool's volume. For a 600 cubic meters pool, the balancing tank should ideally be between 150-180 cubic meters in size to effectively manage water overflow and flow rates. The specific design considerations and requirements should be confirmed with a professional pool designer or engineer.
"Cubic meter" is not a width. It's a volume, an amount of space, or the holding capacity of a box, a bottle, or a tank. When the water in an official Olympic-size swimming pool is 1.36 meters deep, there is 1,700 cubic meters of water in the pool.
180 cubic meters is a measure of volume. It is equivalent to 180,000 liters or approximately 47,550 gallons.
To convert cubic meters to weight, you need to know the density of the substance you are measuring. Multiply the volume in cubic meters by the density in kilograms per cubic meter to get the weight in kilograms. Alternatively, you can use specific gravity if the substance is a liquid.
You can measure a swimming pool b cubic meters or gallons.
A large swimming pool or a small lake could contain roughly 28,000 cubic meters of water.
To convert cubic meters to tonnes, you need to know the density of the material you are measuring. Multiply the volume in cubic meters by the density in tonnes per cubic meter to get the weight in tonnes. The formula is: weight (tonnes) = volume (cubic meters) * density (tonnes per cubic meter).
0.11 cubic meters of what? The weight in tons of 0.11 cubic meters will depend upon the substance and its density.
It all depends upon the density of the substance. 4.8kg of Hydrogen [gas] will take up much, much more cubic meters than 4.8kg of Mercury.Cubic meters are a measure of volume whereas kilograms are a measure of weight. Volume and weight are related by density = weight ÷ volume - the lower the density, the greater the volume for the same weight!
This is not a valid conversion. kg is a measure of weight or mass and cubic meters is a measure of volume.
This is not a valid conversion. kg is a unit of mass or weight and cubic meters is a measure of volume.
You will need to know the weight of the plastering. If you identify a weight per cubic meter, multiply it by the number of cubic meters that you have.
20.16 cubic meters
The weight of a cubic meter varies depending on the density of the substance. For water, which has a density of 1000 kg/m^3, one cubic meter is approximately 2204.62 pounds. For other substances, you would need to know the density to calculate the weight.
A common guideline for the size of a balancing tank for a swimming pool is approximately 25-30% of the pool's volume. For a 600 cubic meters pool, the balancing tank should ideally be between 150-180 cubic meters in size to effectively manage water overflow and flow rates. The specific design considerations and requirements should be confirmed with a professional pool designer or engineer.