You can do a 30 amp twist lock receptacle 220v 3 wire (nema L6-30R) or a strait blade 30 amp 220v 3 wire receptacle (nema 6-30R) or a traditional 30 amp dryer plug. The nema # is a universal # that everyone uses to identify that plug. Ask for it. The most important part is the 30 amp male that your trying to plug in. Match it up with what you putting in the wall. Use #10 gauge wire for 30 amps
Wiki User
∙ 12y agoFor a 220V 30 amp service, you typically need a NEMA 6-30 plug. This plug has three prongs: two hot wires and one ground wire. Make sure to consult a professional electrician to ensure proper installation.
Yes, as long as the plug and receptacle match in pin configurations, it can be done.
No, in North America the plug configuration will not allow that to happen. The blade configuration for 120 volts are in parallel where as the 220 volt configuration are in tandem.
You would need to use a voltage converter or transformer that can take in 110 volts and output 220 volts. Make sure the converter is rated to handle the power requirements of the digital alarm clock. Additionally, check the compatibility of the plug to ensure it fits the socket of the digital alarm clock.
Use a step-up transformer from 110 volts to 220 volts. Try getting one at Home Depot or SEARS.
Yes, you can plug a 220V hair dryer into a 230V plug. The slight voltage difference is within the hair dryer's acceptable range, and it should function without any issues. Just ensure that the plug shapes match or use an appropriate adapter.
The country you live in will have a national plug standard for that application.
Yes, but you need a converter that changes 220 to 110, if you plug it into a 110 plug. Of course, if you plug it into a 220 outlet you don't need a converter, but in either case you will need a plug adapter.
220
You will need a 110 volt to 220 power converter for overseas travel
No, it is more difficult than installing a new plug. You cannot reuse the wire, it must be a dedicated circuit, you will need a new outlet, and you will need a new breaker. Install a new plug.
Not advisible.
220 volt electricity 3 prong plug.
no
You would need to use a voltage converter or transformer that can take in 110 volts and output 220 volts. Make sure the converter is rated to handle the power requirements of the digital alarm clock. Additionally, check the compatibility of the plug to ensure it fits the socket of the digital alarm clock.
An adapter that has 220-volt input. The size (wattage) will depend upon what appliance you want to plug in.
two prong connector & 220 voltage converter
20v for laptop works fine