Wiki User
∙ 8y agoBy definition an electrical circuit is a route or path that starts and finishes at the same place. So there is no part of an electrical circuit that is not necessary, because if there were it would not be an electrical circuit.
An electrical circuit needs a power source. Conductors to transmit the voltage from the power source to the load. The final component of the electrical circuit is the load that you want to energize.
If you remove any of the components there will be an open circuit and the load will be impossible to operate.
Wiki User
∙ 8y agoA closed circuit is a circuit where current can flow because it forms a continuous path, while a complete circuit is a closed circuit that includes all necessary components like a power source, load, and conductive path. So, a closed circuit can be a complete circuit if it has all the necessary components connected together.
A closed circuit ensures that there is a continuous path for the flow of electrons, allowing a complete transfer of energy. When the circuit is open, there is no complete path for the energy to flow, resulting in a disruption of the transfer process.
No, the ground wire is there for safety reasons and only carries current in fault conditions.
A complete circuit requires a power source, a load (such as a light bulb or motor), and conductive material (such as wires) to connect the two components and allow the flow of electric current. The circuit needs to be closed, meaning there is a complete path for the electricity to travel from the power source, through the load, and back to the power source.
In order to flow, electricity must follow a complete path known as a circuit. This circuit typically consists of a power source, conductive material, and a load that uses the electrical energy. If any part of the circuit is broken, the electricity will not flow.
A closed circuit is a circuit where current can flow because it forms a continuous path, while a complete circuit is a closed circuit that includes all necessary components like a power source, load, and conductive path. So, a closed circuit can be a complete circuit if it has all the necessary components connected together.
It is a safety device. It is not an essential part of the circuit.
It has components that are arranged end to end in order to produce light.
A closed circuit is necessary for a complete transfer of energy because it allows for the flow of electrons from the energy source to the load and then back to the source. If the circuit is open, the flow of electrons is interrupted, and energy cannot be transferred effectively. Closing the circuit completes the pathway for the energy to move along.
-- power supply -- power-dissipating component -- connecting conductors
A closed circuit ensures that there is a continuous path for the flow of electrons, allowing a complete transfer of energy. When the circuit is open, there is no complete path for the energy to flow, resulting in a disruption of the transfer process.
An incomplete circuit is an open circuit; i.e. some part of the circuit isn't connected to anything.Or think of it like this: A circuit is complete when there exists a complete (or closed loop) path for the electrons to flow through it. Also known as a closed circuit. If this is not the case, then it is an incomplete (or open) circuit.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
Yes, a circuit is a part of a light bulb. It is designed to provide the necessary electrical connection for the bulb to receive power and emit light. Without the circuit, a light bulb would not be able to function properly.
Inside an electric cell, chemical energy is converted into electrical energy. When the cell is part of a complete electric circuit, the electrical energy is then converted into other forms of energy, such as light, heat, or mechanical work, depending on the components in the circuit.
Since you haven't given us the list of options.... we cannot help you !
No, the ground wire is there for safety reasons and only carries current in fault conditions.