Answer for USA, Canada and countries running a 60 Hertz supply service.On heating elements of higher wattage 240 volts is usually the working voltage. 10000/240 = 41.6 amps. A #8 copper wire with an insulation factor of 90 degrees C is rated at 45 amps. Code states that the conductor can only be loaded to 80% so 45 x .8 = 36 amps. A #6 copper wire with an insulation factor of 90 degrees C is rated at 65 amps. 65 x .8 = 52 amps. No. Power = Voltage X Current.....so a 10,000 watt heat strip will draw 10,000 watts / 120 volts = 83 ampsNot so fast.Actually, it depends on the manufacturers guidelines. My 10KW heat strip, in my hvac system, is rated ( by the manufacturer ) at 41.7 amps.8 AWG wire is rated at 40 amps. 6 AWG wire at 50 amps.I used 6 AWG wire and a 50 amp breaker. I passed the electrical inspection.
Your weight on Mars would be about 84 pounds, as the gravity on Mars is about 38% of Earth's gravity.
A 20 kilowatt generator can typically power a home's furnace and vital appliances, such as refrigerators, lights, and select outlets. However, the exact appliances that can be powered will depend on their individual power consumption. It's important to calculate the power requirements of each appliance to ensure the generator can handle the load.
The general rule of thumb is to size a breaker at 150% of the continuous load or 125% of the non-continuous load. For a 20 amp breaker, this means it can handle a maximum of 16 amps for a continuous load and 20 amps for a non-continuous load, such as a lightning load.
83 cm = 32.68 inches. 83 cm = 32.68 inches. 83 cm = 32.68 inches. 83 cm = 32.68 inches.
83% of 220= 83% * 220= 0.83 * 220= 182.6
83 percent of 220 is 182.6.
220
83
tire size is 10x3.5 tire size is 10x3.5
any solid core plug wire should work
27-83
d 33cm bust 83
This wire should be pink/black.
The hip size is 83. I tried it on my risk and the answer was correct.
305 V8
which bolt