0
If input flow (inflow) to a water holding area is greater than output flow (outflow), the amount of water held in that area will increase. The water level will rise because more is coming in than is going out. As water level rises, outflow may increase. Or it may not. There are variables. But in the mean time, water is "backing up" in the area under inspection.
What else can I help you with?
The diagram shows the same type of molecules in area A and B with the passage of time some molecules move from area A to B this movement is the result of the process of?
The movement of molecules from area A to area B over time is the result of the process of diffusion. This process occurs as molecules naturally move from an area of higher concentration (A) to an area of lower concentration (B) until equilibrium is reached. Diffusion is driven by the random motion of molecules and does not require any energy input.
Form of a diffusion in membrane through fluid is what?
The form of diffusion in a membrane through fluid is passive transport. This process does not require energy input and allows molecules to move from an area of high concentration to an area of low concentration. It occurs naturally as a result of the random movement of molecules.
What is the most amount of crop output from a given area of planted land called?
The most amount of crop output from a given area of planted land is referred to as "yield." Yield is typically measured in terms of weight or volume per unit area, such as bushels per acre or tons per hectare. It serves as a key indicator of agricultural productivity and efficiency. High yield can result from factors like soil quality, climate, and farming practices.
Which is bigger Illinois or Hawaii and how many times?
Illinois' area is 5.30 times the area of Hawaii.
Is Montana bigger than Poland?
Montana is "bigger." Montana has a total area of 147,042 square miles. Poland has a total area of 120,696 square miles.
Is a games controller input or output?
Input, as you are inputting information into the games console, so that you can play.
In a hydraulic lift system the output force is greater than the input force because?
the output force is greater than the input force in a hydraulic lift system due to the difference in the surface area of the input and output pistons. The hydraulic fluid transmits pressure equally in all directions, allowing a smaller input force over a larger area to generate a larger force on a smaller area at the output. This principle is known as Pascal's law.
Is a LAN an input or output device?
A Local Area Network (LAN) is neither an input nor an output device; rather, it is a network that connects multiple computers and devices within a limited geographical area, such as a home, school, or office. It facilitates communication and data transfer between connected devices. Input and output devices refer to hardware that interacts directly with the user or processes data, such as keyboards (input) and monitors (output).
How is force multiplied by a hydraulic system?
input pressure X area = output pressure X area
What are subdivision of computer main memory?
Input Storage Area Working Storage Area Output Storage Area Program Storage Area
Full form of Io?
in computer's area io(device) means input and output devices.
A hydraulic device has an input piston with an area of 20 cm2 and an output piston with an area of 100 cm2 An input force of 1000 N will provide an output force of 5000 N.How will the pressure on?
F1/A1=F2/A2 F2=F1(A2/A1) plug in the numbers and you have your ans. NOTE: do you know how to find the Area when given diameter? that is kinda imp. for this problem.
What is NetBIOS an acronym for?
NetBIOS is an acronym for Network Basic Input/Output System. Network basic input/output system allows two or more different computers to communicate over the same area network.
What is an area in RAM or on the hard drive designated to hold input and output on their way in or out of the system.?
An I/O buffer.
What will happen to the size of the force of the exerted by a hydraulic system if the output piston has a smaller area?
If the output piston has a smaller area than the input piston in a hydraulic system, the force exerted by the system will increase. This is due to the principle of Pascal's Law, which states that pressure in a fluid is transmitted equally in all directions. As a result, a smaller area on the output side will experience a higher pressure, leading to a greater force being exerted.
Is WAN connection an input or output?
A WAN (Wide Area Network) connection is typically considered an input/output (I/O) interface. It facilitates the transfer of data between different locations, allowing data to be sent (output) and received (input) across the network. Therefore, it serves both functions, enabling communication and data exchange between devices over long distances.
How is a force multiplied in hydraulic system?
A force is multiplied in a hydraulic system through the use of a larger surface area on the output piston than the input piston. When a smaller force is applied to the input piston, it creates pressure in the hydraulic fluid, which then exerts a larger force on the larger output piston, resulting in a multiplied force output.
