0
For more information about two switches controlling one light see the Related Questions shown below.
* You need to have two switches on to get power to the light because you have them wired in series. * I going to go out on a limb here and say that you possibly are asking about three way switches and why are they functioning in this manner. * One of the switches or possibly both are wired incorrectly.
* You may be able to sort this out by yourself through trial and error, but it would probably be quicker to consult a local electrician.
<><><> By asking this question you are probably not quite ready to take on this particular task. The correct answer to your question will depend on the exact locations of the two light switches and the lights they control.
<><><> As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
What else can I help you with?
What if lights do not work but outlets work?
You probably blew the breaker for the lights. While usually the lights and outlets in a room are on the same breaker, it isn't always done that way. And you may have blown the light bulbs in the lights.
How do you wire one light and one GFCI and another light light and fan with two switches and one power line?
You can wire the first light and GFCI in series on one switch. For the second light and fan with two switches, use a 3-wire cable for the hot, neutral, and traveler wires between the switches. Connect the hot wire to the power source, and then branch out to each switch. Connect the light and fan to the switches separately using the switched leg of the power from each switch.
Should the light in a newly wired house be off when both 3-way switches are in the down position?
Yes, if both 3-way switches are in the down position, the light should be off. In a three-way switch setup, one switch controls the power coming in and the other controls the power going out. When both switches are down, the circuit is broken and the light is off.
How do you wire 2 new lights with on-off switches using wires coming from an existing outlet?
You can attach/splice into the power feed to outlet (ways of doing this can vary with how the outlet is wired but make sure that all or part of the outlet isn't controlled by an existing switch). You can then take the hot, neutral and ground to a light fixture or to the first switch, then to the second switch. It is normally easier to do this project by taking power to the light (s) first, with 2 wire drops to the switches, from basement or attic.
Does a dimmer switch save electricity?
Yes, dimmer switches can save electricity by reducing the amount of power used to light a room. By adjusting the level of light output, dimmer switches help to regulate energy consumption and lower electricity bills.
How can I wire 3 light switches in one box using a diagram?
To wire 3 light switches in one box, you will need to connect the power source to the switches and then connect the switches to the lights. Use a diagram to show the wiring connections for each switch and the lights.
How do you light up all the lights in mission 6?
To light up all the lights in mission 6, you need to carefully plan your moves and use the switches strategically to create paths that will turn on all the lights. Start by identifying the order in which you need to toggle the switches to ensure all lights are illuminated. Remember to pay attention to the connections between the switches and the lights to solve the puzzle efficiently.
How can I control 2 lights with 2 switches in a single circuit?
To control 2 lights with 2 switches in a single circuit, you can use a three-way switch setup. Connect one switch to the power source and the first light, then connect the second switch to the first light and the second light. This way, you can control both lights independently with the two switches.
What are 10 switches that can be found at home?
Ten switches commonly found at home include light switches for overhead lights, dimmer switches for adjustable lighting, outlet switches for controlling power to electrical outlets, and three-way switches for controlling lights from two locations. Additionally, you might find toggle switches for fans or appliances, rocker switches for lamps, motion sensor switches for automatic lighting, smart switches for app-controlled devices, GFCI switches for safety in wet areas, and pull-chain switches for ceiling fans or light fixtures.
What if lights do not work but outlets work?
You probably blew the breaker for the lights. While usually the lights and outlets in a room are on the same breaker, it isn't always done that way. And you may have blown the light bulbs in the lights.
If you have a light in your kitchen operated by two different switches is it right that you should still get a power reading when the switches are off?
Yes, because the light is using 3-way switches. There is always "power" travelling between the switches.
In what order do you push down the buttons on 24 carrot island?
To turn on the power in the Carrot Cake Factory, push the left and right switches halfway down, and the middle switch all the way down. The lights will light up when you do.
How can I wire 2 lights with 2 switches in a single circuit?
To wire 2 lights with 2 switches in a single circuit, you will need to connect the power source to the first switch, then run a wire from that switch to the first light. From the first light, run another wire to the second light. Finally, connect a wire from the second light to the second switch. This setup allows you to control each light independently with its respective switch.
How do you wire one light and one GFCI and another light light and fan with two switches and one power line?
You can wire the first light and GFCI in series on one switch. For the second light and fan with two switches, use a 3-wire cable for the hot, neutral, and traveler wires between the switches. Connect the hot wire to the power source, and then branch out to each switch. Connect the light and fan to the switches separately using the switched leg of the power from each switch.
How can I wire a 3-way switch with a 2 lights diagram to control the lighting in a room effectively?
To wire a 3-way switch with 2 lights to effectively control the lighting in a room, you will need to connect the switches and lights in a specific way. The power source should connect to the common terminal of the first switch, with the travelers connecting the two switches. The first light should be connected to the first switch, and the second light should be connected to the second switch. This setup allows you to control both lights independently with the two switches.
What would cause lights to flicker?
Lights may flicker due to issues with the electrical system, such as loose wiring, overloaded circuits, or a problem with the power supply. Other factors like faulty light bulbs or switches can also cause flickering lights.
Why is my LED strip light flickering?
LED strip lights may flicker due to issues such as loose connections, incompatible dimmer switches, or power supply problems. It is important to check these factors to ensure proper functioning of the lights.
