answersLogoWhite

0


Best Answer

99% it is a defective blockheater, it works like an element it shorts out & trips the GFI, i would also check the extension cord & if possible try a different plug, if it still trips, its the blockheater.

User Avatar

Wiki User

βˆ™ 13y ago
This answer is:
User Avatar
More answers
User Avatar

AnswerBot

βˆ™ 7mo ago

A Dodge block heater may trip a GFCI outlet due to a leakage current exceeding the threshold of the GFCI, causing it to detect a imbalance and trip for safety reasons. This could be due to a faulty block heater, wiring issues, or moisture ingress. It's important to have a licensed electrician inspect the system to ensure that it is safe to use.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does a Dodge block heater trip a GFI outlet?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

Can you use a none dedicated outlet for a space heater for a short period of time?

Yes, a space heater can be plugged into any outlet. Depending on what else is drawing current on the circuit will govern whether the circuit will trip or not. If the heater is plugged in and the circuit does not trip it can be left plugged as long as it is needed. If the heater trips after a few seconds, then try another outlet.


Plugging an electric heater into a GFI outlet caused the lights and other outlets to go out but didn't trip the circuit breaker why?

It's possible that the GFI outlet was overloaded by the electric heater, causing it to shut off power to prevent a potential hazard. The circuit breaker may not have tripped because it was on a different circuit from the GFI outlet. It's important to have a licensed electrician inspect the outlet and wiring to ensure safety.


How much amperage is needed to trip a 20amp GFCI outlet?

A 20 amp GFCI outlet will trip when the current exceeds 20 amps by a certain amount, typically around 5 mA to 6 mA, which is the typical trip threshold for GFCI outlets.


Will a GFCI outlet trip when the current is reduced or shut off?

A GFCI outlet will trip when it detects a ground fault, not when the current is simply reduced or shut off. The purpose of the GFCI outlet is to quickly shut off power when it senses a potential electrical hazard, such as a ground fault or leakage.


GFI electrical outlet at the garage where the freezer hook up keeps on tripping but when plug at the electrical outlet of the garage door openner does not trip. What is mostly the problem?

The GFCI outlet in the garage where the freezer is plugged in may be faulty or overloaded, causing it to trip. It's possible that the outlet for the garage door opener is on a separate circuit and not affected. Check the load on the GFCI outlet, inspect for any damage, and consider replacing it if the problem persists.

Related questions

Can you use a none dedicated outlet for a space heater for a short period of time?

Yes, a space heater can be plugged into any outlet. Depending on what else is drawing current on the circuit will govern whether the circuit will trip or not. If the heater is plugged in and the circuit does not trip it can be left plugged as long as it is needed. If the heater trips after a few seconds, then try another outlet.


How difficult is it to remove a heater core from a 1995 Dodge Caravan and approximately how long will it take?

it takes about 6.5 hours round trip you need to remove the dash to remove the heater box


Plugging an electric heater into a GFI outlet caused the lights and other outlets to go out but didn't trip the circuit breaker why?

It's possible that the GFI outlet was overloaded by the electric heater, causing it to shut off power to prevent a potential hazard. The circuit breaker may not have tripped because it was on a different circuit from the GFI outlet. It's important to have a licensed electrician inspect the outlet and wiring to ensure safety.


How much amperage is needed to trip a 20amp GFCI outlet?

A 20 amp GFCI outlet will trip when the current exceeds 20 amps by a certain amount, typically around 5 mA to 6 mA, which is the typical trip threshold for GFCI outlets.


What is the difference between overload trip and over current trip. if there is an overload trip the current will be raised above the set point?

An overload trip is due to too much load on a circuit (for example, my wife running a hair dryer and portable heater on the same outlet). An over current trip is the same thing, but it can also refer to an actual fault condition where conductors have come in contact with eachother/shorted.


Will a GFCI outlet trip when the current is reduced or shut off?

A GFCI outlet will trip when it detects a ground fault, not when the current is simply reduced or shut off. The purpose of the GFCI outlet is to quickly shut off power when it senses a potential electrical hazard, such as a ground fault or leakage.


Does the gfci outlet beep when there's aproblem?

No, it will just trip and cut off the power.


GFI electrical outlet at the garage where the freezer hook up keeps on tripping but when plug at the electrical outlet of the garage door openner does not trip. What is mostly the problem?

The GFCI outlet in the garage where the freezer is plugged in may be faulty or overloaded, causing it to trip. It's possible that the outlet for the garage door opener is on a separate circuit and not affected. Check the load on the GFCI outlet, inspect for any damage, and consider replacing it if the problem persists.


Where is the trip odometer button 2012 dodge grand caravan se model?

The trip odometer button on a 2012 Dodge Grand Caravan SE model is located on the dash near the speedometer. It is held down for 5 seconds to reset the trip to zero.


Why does your circuit breaker trip when your heater comes on?

That circuit is overloaded. Call an electrician to fix it for you.


How do I fix a tripped GFCI outlet?

To reset a tripped GFCI outlet, locate the outlet and press the "Reset" button. If the outlet continues to trip, check for any water leaks or damaged appliances causing the issue. If the problem persists, consult a qualified electrician for further assistance.


How do you determine if an outlet is after or before the gfci?

You can determine if an outlet is after a GFCI by pressing the "test" button on the GFCI outlet. If the GFCI trips and cuts off power to the outlet, then that outlet is downstream from the GFCI. If power is not cut off, then that outlet is upstream from the GFCI.