0
there is a little metal tab that connects the upper & lower outlets, make sure it hasn't been removed. its located on the side of the device were the screws are. it bridges the screws together. this tab is removed when a person wants to switch half the outlet.
hope this helps. that's only thing i can think of unless you have a defective device.
What else can I help you with?
Can you splice branch circuit conductors with wire nuts inside sub panels if the wires are too short to reach the bar?
No, the electrical code disallows distribution panels to be used for splicing of conductors or to be used as a raceway for through conductors. Some inspectors will allow the use of butt splices, properly installed with the correct tool and finally wrapped with electrical tape. Before the job is started inquire at the Electrical Inspection Agency for their thoughts. <<>> You will be better off to splice the wires at some point outside the panel in a junction box (J-box). This method will be legal under most (perhaps all) electrical codes and will allow easier access.
When does splicing occur?
nucleus
Is splicing ok in a conduit body?
The conduit body or box has to be clearly marked for its fill capacity for wires or devices. So Long story short, Yes as long as the conduit body is listed for it. If it has no markings then no
Difference between protein splicing and RNA splicing?
Protein splicing involves the excision of intervening peptide sequences called inteins from a precursor protein to produce the final functional protein, while RNA splicing involves removing introns and joining exons in pre-mRNA to form mature mRNA. Protein splicing occurs post-translationally in the protein after translation, while RNA splicing occurs co-transcriptionally during mRNA processing.
Is T joint is allowed in electrical wiring?
T joint tap splicing was common practice when knob and tube wiring was popular in the 30's and 40's. Now days all splices must be made in junction boxes. It is the same principal when you group wires together with a wire nut only now safer. If overheating of the splice occurs, a possible fire is contained in the junction box.
Is there gold in old electrical junction boxes?
No. There is no gold in electrical junction boxes. If there was there would be many rich electricians.
Do you have to splice conductors in a j-box with a device?
Yes, it is common practice to splice conductors in a junction box when connecting them to a device such as a switch or outlet. Splicing ensures a secure and reliable electrical connection.
What do you mean by splicing in electronics?
Splicing means joining in optical fibers.a process called splicing takes place to join two fibers.
Can you splice branch circuit conductors with wire nuts inside sub panels if the wires are too short to reach the bar?
No, the electrical code disallows distribution panels to be used for splicing of conductors or to be used as a raceway for through conductors. Some inspectors will allow the use of butt splices, properly installed with the correct tool and finally wrapped with electrical tape. Before the job is started inquire at the Electrical Inspection Agency for their thoughts. <<>> You will be better off to splice the wires at some point outside the panel in a junction box (J-box). This method will be legal under most (perhaps all) electrical codes and will allow easier access.
What is the process called which removes introns from RNA?
RNA splicing
Can you junction box 8ga wire with 10ga wire?
There is no restriction on different size wires being spliced in the same junction box. If your question involves splicing 8ga. to 10ga, this also is not a problem so long as the circuit allows for 10ga wire.
Why does the brake light on the spoiler stay on?
sounds like you installed after market spoiler? then wired to a continuous hot source instead of splicing into brake line witch would be intermittently only when pressing on peddle!
When does splicing occur?
nucleus
Can you give me a sentence with the word splicing?
Cloning and gene splicing are are highly advanced, if not outright dangerous, practices of biology.
What does splicing mean?
Splicing is when you take two things and put them together. For example you can splice a piece of rope with another piece of rope. You can also do this in genetics by gene splicing.
Why is splicing of optical fibers done?
Splicing of optical fiber cable is done to extend a cable, making it longer, or to repair a break in it. Splicing is preferred over installation of connectors, because the connectors introduce losses and degrade reliability. Some connectors are necessary, but those are placed in a protected environment, and their use is minimized. Besides, a typical cable, with 56 or more strands, would require 56 or more connectors, and that would create a large lump in the cable.
Is splicing ok in a conduit body?
The conduit body or box has to be clearly marked for its fill capacity for wires or devices. So Long story short, Yes as long as the conduit body is listed for it. If it has no markings then no
