Cross-sectional_area = area of circle with diameter 100 mils.
1 mil = 1/1000 in.
radius = ½ × diameter
area_circle = π × radius² = π × (½ × diameter)² = π × (½ × 100 × 1/1000 in)² ≈ 0.00785 in²
0.01cmil
To find area of a circle using diameter, you use this formuler. Area=pi(diameter/2)(diameter/2)
The diameter of a circle with an area of 37.68 is 6.92
The area is four times as large if the diameter doubles.The area of a circle is A = (pi)r2 or (pi)(diameter/2)2Since d is squared, it increases the area by the square of 2 if the diameter is doubled.Try calculating the area for a diameter of 2m, 4m and 8m to prove this.
A circle with a diameter has an area of 50.265486543928724876568901 sq. ft.
If area of circle is equaled to 100pi what is the radius?
Low resistance.AnswerSince resistance is inversely proportional to the cross-sectional area of a conductor, increasing the diameter ('thickness') of a conductor will reduce its resistance.For example, doubling the diameter of a circular-section conductor will quadruple its cross-sectional area, and reduce its resistance by one quarter.
Doubling the diameter of a circular-section conductor will quadruple its cross-sectional area and, therefore, reduce its resistance by a quarter. Doubling the length of a conductor will double its resistance. So, in this example, the resistance of the conductor will halve.
The cross-sectional area is one of the factors that determines how much current a conductor can carry -this is regardless of the shape of that conductor's cross section (many conductors are not circular). So the diameter is of not much interest.
Resistance will decreases... Because R is inversely proportional to Area of the conductor.AnswerIf the conductor has a circular cross-sectional area, then doubling the diameter will reduce the resistance to one quarter of its original distance. This is because area is proportional to the square of the radius, and resistance is inversely proportional to cross-sectional area.
To find area of a circle using diameter, you use this formuler. Area=pi(diameter/2)(diameter/2)
It is a wire size, the equivalent cross sectional area in thousands of circular mils. e.g. 500 MCM or kcmil = 500,000 circular mils. The circular mil is a unit of area used especially when denoting the cross-sectional size of a wire. It is the equivalent area of a circle whose diameter is 0.001 (10-3) inch. AWG stands for American Wire Guage.
It is the tendency of alternating current to flow more in the outer part of the conductor than in the centre. This reduces the effective cross-section area of the conductor. For this reason conductors with a diameter of more than about 30 mm are uncommon.
The area of a circle with a diameter of 9.4 m is: 69.4 m2
Conductor resistance = Conductor resistivity * Length of conductor / Cross sectional area of conductor. So. It is directly proportional to material & conductor length. And inversely proportional to the cross sectional area of conductor.
A diameter is a line, and has no area.A circle whose diameter is 8.5 has an area of 56.745. (rounded)
If you have a conductor ... say, a copper wire ... and you keep its diameter and temperatureconstant, then yes, its resistance will be directly proportional to its length.
The diameter of a circle with an area of 37.68 is 6.92