When you are in a situation that might lead to a head on collision. Read the road ahead. Reduce your speed. Drive to the Right. Ride off the road if necessary.
That there is a 10% slope in the road ahead, meaning it is very steep.
there is a brake down ahead
engine speed (rpm) road speed (mph)
2 times the velocity or 11.2 m/s.
15 mph
Yes, scanning the road ahead is important for detecting potential hazards, like children. Driving at a slower speed gives you more time to react to unexpected situations, such as a child running into the street. Combining both strategies increases your chances of avoiding a collision with a child.
Bill Gates has written several books, including "The Road Ahead," "Business @ the Speed of Thought," and "How to Avoid a Climate Disaster."
it is too overlook the road ahead
It means that you are about to enter an area where the posted speed limit is lower than the one you are in now.
road conditions, traffic density, and how far you can see ahead
The Road Ahead (1995)Business @ the Speed of Thought (1999)
The road is narrower ahead. The road is narrower ahead. The road is narrower ahead.
There are: 1. stop 2. speed 3. turn lanes 4. reduce speed 5. rest area ahead 6. speed bumps 7. rumble strips ahead (or in the middle)
The Road Ahead - album - was created in 2004.
You could stop at 20 miles per hour without hitting him. --------------------- Assuming The Highway Code formula for stopping distances: stopping_distance = thinking distance + stopping time = speed + speed²/20 ft (where speed is in mph) → 65 = speed + speed²/20 → speed² + 20speed + 1300 = 0 → speed = -10 + 10√14 mph ≈ 27.4 mph (The negative square root can be ignored as it gives a negative speed which is nonsense for this problem.) However, this assumes that you observe, think and can start braking within 15/22 (≈ 0.68) seconds of the child running into the road (1ft for every 1 mph of speed), and your braking matches the Highway Code assumptions for good tyres, brakes and dry road conditions.
"The Road Ahead" by Bill Gates was published in English only.