0
What else can I help you with?
How much wire does it take to fence a rectangular garden that is 300 feet by 250 feet?
1100 ft
How many feet of barbed wire to fence 5 acres?
To fence 5 acres with barbed wire, first calculate the perimeter of the area. An acre is 43,560 square feet, so 5 acres is 217,800 square feet. Assuming the area is a square, each side would be about 660 feet, resulting in a perimeter of approximately 2,640 feet. Therefore, you would need around 2,640 feet of barbed wire to fence 5 acres.
You have 49. How much do you need to get to 100?
IF we have a area of 49 Sq meter and we need to make fence on it then HOw much wire we need ??
How many meters of wire fencing are required to a fence a square field of side 28m?
Well, honey, to fence a square field with sides of 28 meters, you would need 112 meters of wire fencing. Each side of the square is 28 meters long, so you just add up all four sides to get the total length of fencing needed. Simple math, darling.
Do all rectangles with the same perimeter have the same area?
No. Here are four rectangles with the same perimeter:1 by 6 . . . . . perimeter = 14, area = 62 by 5 . . . . . perimeter = 14, area = 103 by 4 . . . . . perimeter = 14, area = 1231/2 by 31/2 . . perimeter = 14, area = 121/4With all the same perimeter . . . -- The nearer it is to being square, the more area it has.-- The longer and skinnier it is, the less area it has. If somebody gives you some wire fence and tells you to put it uparound the most possible area, your first choice is to put it up ina circle, and your second choice is to put it up in a square. Rectanglesare out, if you can avoid them.
How many fence post needed to fence 18 meters?
It depends on what kind of fence you wish to put up. For example, an electrified barbed wire and steel post fence would only require about three posts. But a wood plank and wood post fence would require about five or six.
What is a nail called when wrapped around a fence post?
If the bent nail is used to fix a plain wire or strand of barbed wire to a fence post, and the bent nail is pointed on both ends, then it is a staple.
Barbed Wire Fence Repair?
form_title=Barbed Wire Fence Repair form_header=6873 Choose the type of repair(s) you are looking for*= [] Post is damaged [] Post is wobbly [] Barbed wire is damaged [] Barbed wire is rusty [] Fencing is loose [] Gate is sagging [] Hardware is damaged/broken/missing [] Electric fence not working [] Other What is the main reason for the fence?*= () Contains livestock () Property boundary () Creates a barrier () Other
How can I tighten fence wire effectively?
To tighten fence wire effectively, use a fence stretcher tool to pull the wire taut and secure it with fence staples or clips. Adjust the tension as needed to ensure the wire is properly tightened and secure.
How to make a wire fence for cattle?
What type of wire fence for cattle? Barbed wire? Temporary hot-wire? Hi-tensile wire? As you can see, there's more than one type of wire fence to build for cattle.
You set 68 fence post 20 ft apart how wire do you need?
you are kidding, right?
What is the duration of Heaven with a Barbed Wire Fence?
The duration of Heaven with a Barbed Wire Fence is 1.03 hours.
AB Steel?
AB Steel can manufacturer all varieties of wire, including Chainlink Fence and Barbed Wire.
How can I tighten a wire fence effectively?
To tighten a wire fence effectively, you can use a fence stretcher tool to pull the wire taut and secure it in place with fence staples or clips. Additionally, you can adjust the tension of the wire by using a come-along or ratchet strainer to tighten it further. Regularly inspecting and maintaining the fence will help ensure its stability and longevity.
What is a wire fence point that starts with m?
A wire fence point is called a barb. It begins with the letter b.
When was Heaven with a Barbed Wire Fence created?
Heaven with a Barbed Wire Fence was created on 1939-11-03.
How do you install tension wire on a chain link fence?
To install tension wire on a chain link fence, first stretch the wire along the bottom of the fence, ensuring it is taut. Attach one end of the tension wire to a terminal post using a wire clip or tie. Then, weave the wire through the chain link fabric, securing it at intervals with wire ties, and finish by tightening and securing the other end to the opposite terminal post. Finally, check the tension to ensure the wire is firm and supportive.
