0
To convert cubic meters to metric tons of fuel oil, you need to know the density of the fuel oil in metric tons per cubic meter. Once you have the density value, you can multiply the number of cubic meters by the density to get the mass in metric tons. The formula for this conversion is: Mass (in metric tons) = Volume (in cubic meters) x Density (in metric tons per cubic meter).
Add your answer:
Earn +20 pts
How many gallons in a metric ton of bunker?
The conversion rate of metric tons to gallons depends on the density of the substance being measured. Bunker fuel, a type of fuel oil used in ships, has a density of around 0.96 metric tons per cubic meter. Therefore, to convert metric tons of bunker fuel to gallons, you would need to know the volume in cubic meters and then use the conversion factor of 1 cubic meter being approximately equal to 264.172 gallons.
Weight per cubic meter diesel fuel?
500
How many gallons of D2 diesel fuel in 1 metric ton?
266
How many barrels of jet fuel in a metric ton?
The specific gravity for aircraft fuel is approximately 0.8 (depending on grade and anti freeze additives). Therefore 1250 litres would weigh a metric tonne (1000kg).
How many inches in a 500 gallon fuel tank 5feet 5 inches long?
115502.6 cubic inches
What is the density for Fuel in Kilogram to Metric tonnes?
Please specify exactly the type of this fuel to find the density in catalogs.Also kilogram/metric tonne is not a unit for density.Generally petroleum diesel has a density of 0,832 kg/L or 832 kg/cubic meter.
How many cubic meters in 25000 BTU per hour?
One BTU per hour is equal to approximately 0.00029307107 kilowatts. To convert 25,000 BTU per hour to cubic meters, you first convert it to watts (25,000 BTU/hr = approximately 7,328 watts). Then you can use the power formula, Power (W) = Volume flow rate (m^3/s) * Density of air (kg/m^3) * Specific heat of air (J/kg*K) * Temperature change (K) to calculate the volume flow rate in cubic meters.
How do you convert 1 metric ton of diesel fuel to gallons?
There are 1000 kilograms (kg) in a metric ton (or tonne). And there are about 0.264 gallons in a litre. Also, the density of diesel fuel is right at about 0.85 kilograms per litre. Since you have a metric ton of diesel fuel, that is 1000 kilograms of diesel fuel, you need to know how many litres of diesel fuel you have. Divide 1000 kg by 0.85 kg/litre and you'll get about 1176.5 litres. Now convert that to gallons by multiplying 1176.5 litres by 0.264 gallons/litre and you'll get about 310.6 gallons of diesel fuel in that metric ton you started with.
What are metric measurements for volume?
Using metric measurements you would most commonly purchase car fuel or milk in "Litres" (or "Liters" American spelling).However, the base unit of volume is the cubic metre:-Where there are:-1000 cubic metres in a cubic kilometer1000 litres in a cubic metre.100 centileters in a litre.1000 millilitres in a litre.10 mililitres in a centilitreand:-- milliliter = ml-- cubic centimeter =cc-- liter =l
What is the volume in cubic meters of one ton Heavy Fuel Oil?
1 cubic meter is 1000 Liters 100 cm = 1 meter, 1m x 1m x 1m = 1 cubic meter 100cm x 100cm x 100cm=1,000,000cubic cm = 1 cubic meter 1 cubic cm = 1 ml, 1000ml = 1 Liter (1,000,000 cubic cm) x (ml/cubic cm) x (Liter/1000 ml) = 1000 Liters.
How many barrels fuel oil 3.5 percent per metric ton?
To convert a metric ton of fuel oil with 3.5% sulfur content to barrels, you would need to know the specific gravity of the fuel oil. The conversion factor will depend on the density of the fuel oil, which can vary. It is recommended to consult a fuel oil conversion chart or use a specific formula based on the density of the fuel oil being used.
How many liters of jet fuel make a metric ton?
1,183 litres of jet fuel in a metric tonne
Gallons of D2 per metric ton?
There are approximately 312 gallons of D2 diesel fuel in one metric ton. This can vary slightly depending on the density of the fuel.
How many gallons of heavy fuel oil are in a metric ton?
About 317 gallons of heavy fuel oil are in a metric ton.
How do you convert 1 metric ton of furnace oil to 1 liter of furnace oil?
you would convert it buy using specific gravity. the specific gravity of fuel oil is 0.893 at 60F. so that said 1 liter of furnace oil would weigh 893g. one metric tonne of furnace oil would equal roughly 1120 liters
How many liters of air goes into a diesel engine for 1 liter of fuel?
Nine cubic meters of air is required to burn 1 liter of fuel in a diesel engine. A person does not put liters of air into a diesel engine. Liters of fuel are put into a diesel engine.
How many cubic feet per gallons in a 50 k fuel bladder?
A 50 k fuel bladder holds approximately 13,208 gallons of fuel. There are 7.48 gallons in a cubic foot, so a 50 k fuel bladder is equal to around 1,766 cubic feet.
