All you have to do is find the area divide it by the base and then you get the height.
To find the perpendicular height of a square pyramid, first compute for the volume of the pyramid. Then divide the volume by the area of the base to find pyramid's height.
To find the height of a triangle you measure it. It has to be from the middle of the base to the top point.
the base of a triangular sail is 8 m shorter than its height. the area is 24cm^2. Find the base and the height of the sail.
The radius is 3 inches pi*32*height = 271.4 cubic inches Divide both sides by pi*9 to find the height: height = 9.598811457 or about 9.599 inches
The surface area of cylinder with radius equal to 4 and height equal to 9 is 326.725 square units.
slave cylander for what? slave cylander for what?
is the slave cylander visable under the vehicle?some have the clutch cylander inside the bell housing. if you cannot see the slave cylander you will need to remove transmission and bell housing to get at slave cylander
Volume of cylinder = pi*52*10 = 785.398 cubic cm to 3 decimal places
there is no bleeder valve on a master cylander. u need to crack a fluid line open on cylander and bleed from there and from all wheels there is no bleeder valve on a master cylander. u need to crack a fluid line open on cylander and bleed from there and from all wheels
you cannot check fluid level in a slave cylander. if cylander is not working properly. you either have air in it and need to bleed it,or cylander is defective and needs replacing
Try gun shop, gun show, want ads
2
at the cylander break
A garduated cylander, in order to find the amount of water displaced you see how much the water has risen
It depends on what you mean by base. The radius or the diameter of the circle? If the diameter is 8 cm it's 502.4. If the radius is 8 cm it's 2009.6.
To find the volume of a cylinder, you can use the formula V = π * r^2 * h, where r is the radius of the base of the cylinder and h is the height of the cylinder. Simply plug in the values for r and h into the formula and calculate the volume.