0
A 1:1 ratio can be defined in terms of volume or in terms of mass (weight). In either case, if the solution does not already contain water, a 1:1 ratio will require the same quantities of the solution and of water.
The question suggests that the ratio is by mass, so add 32 ounces (mass) of water.
Add your answer:
Earn +20 pts
How much mix do you need for a ratio of 1 part mix to 23 parts water when you are using 16 ounces of water?
16/23 parts mix.
How much of a 50 percent solution should be added to 1 liter to make a 25 percent solution?
Mix this 50% solution in equal quantities with water(?) to halve it's strength. So use 1 litre of the 50% solution and 1 litre of water of that's what you are diluting it with.
How do you mix a 4 to 1 ratio?
For every amount of the first thing take a quarter of that amount of the second. Mix. Done.
How do you mix 20 to 1 ratio out of 32 Oz.?
It is 640/21 oz and 32/21 oz respectively.
What is the ratio of 1 to 2?
The answer is 1/2, or one half. A ratio of x to yis always x/y. More correctly, it is 1/3 of one item and 2/3 of another.If you divide $1200 between two people in the ratio 1:2 the first gets 1/3 of $1200, which is $400, and the other gets 2/3 of $1200, which is $800.If you mix your orange squash with water in a ratio of 1:2, then for each cup of squash you add 2 cups of water to get 3 cups of your drink altogether.
How can prepare ethanolic solution?
To prepare an ethanolic solution, simply mix ethanol (commonly known as alcohol) with a solvent such as water. The ratio of ethanol to water will determine the concentration of the solution. Be sure to measure the quantities accurately and mix well to ensure homogeneity.
How do you make an electrolyte solution?
To make an electrolyte solution, you can mix water with a source of electrolytes such as salt or sports drinks. The ratio of water to electrolytes will depend on the specific needs of the individual consuming the solution. It's important to properly measure and mix the ingredients to ensure the solution is effective.
Why can't pepper and water be a solution?
Water and Pepper do not make a solution because they do not mix together. Salt and water are a solution because they mix together.
The appropriate mixing ratio for a solution to kill bloodborne pathogens is 1 part chlorine to 10 parts water. If you are mixing a solution in a spray bottle with 15 ounces of water how much chlorine?
You would need to mix 1.5 ounces of chlorine with the 15 ounces of water to create the appropriate solution to kill bloodborne pathogens. This ratio ensures the solution is effective without being too concentrated. Be sure to measure carefully to maintain the correct ratio.
How do you dilute sulotion?
To dilute a solution, you can add more solvent (such as water) to decrease the concentration of the solute. The ratio of solute to solvent will determine the final concentration of the diluted solution. It is important to mix the solution thoroughly after adding the solvent to ensure uniformity.
What happens to the sugar and drink mix when there added to water?
When sugar and drink mix are added to water, they dissolve and mix with the molecules of water. The sugar molecules break apart and are evenly distributed throughout the water, creating a sweetened solution. Similarly, the drink mix particles dissolve into the water, creating a flavored solution.
How do you prepare HCL 2N solution?
To prepare a 2N HCl solution, you can mix concentrated hydrochloric acid (approximately 36.5% HCl by weight) with water in a specific ratio. For example, to make 1 liter of 2N HCl solution, you would need to mix approximately 167 mL of concentrated HCl with about 833 mL of water. Always add acid to water slowly while stirring, and wear appropriate safety equipment.
When making frozen fruit punch the frozen mix is the -----and the water is the ------of the solution?
frozen mix is the solute The water/ice is the solvent.
Is saltwater a solution or solute?
Saltwater is a solution because you can get fresh water and some salt and mix it and then you get saltwater.
How do you dilute formalin?
To dilute formalin, you can mix it with water in the desired ratio. For example, to create a 10% formalin solution, mix 1 part formalin with 9 parts water. Always handle formalin carefully as it is a hazardous chemical and follow proper safety protocols.
Why does concrete mix with low water cement ratio resulted in hardened concrete having higher strength than those with high water cement ratio?
Why does concrete mix with low water cement ratio resulted in hardened concrete having higher strength than those with high water cement ratio?
What ratio of sodium hydroxide to water for an electrolyte?
A common ratio for making a sodium hydroxide electrolyte solution is around 1:10, meaning one part sodium hydroxide to 10 parts water by weight. This solution is commonly used in electrochemical processes and should be handled with care due to its caustic nature. It is important to mix the solution slowly and carefully to avoid splashing and to always add the sodium hydroxide to the water, not the other way around.
