answersLogoWhite

0


Best Answer

6in = 0.5ft

34.5ft/0.5ft = 69

You will need 69 of the 6in boards.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many fence boards do you need for 34.5 feet of fence.useing 6 inch boards?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is it an optical illusion i just built an 8 foot high fence using 6 inch wide solid boards leaving a 1 inch open space between boards but when a car drives by you can see the whole car Why?

The car is painted on the fence, or you are in front of the whole


Need to cover 2000 square feet with 6 inch wide boards how many lineal feet do you need?

4,000 linear feet.


How many 6 inch x 16 foot boards do i need to do 200 square feet?

6 inch = 1/2 foot so each board is 16 x 1/2 = 8 square feet 200/8 = 25 boards


Ihave a fence 97 ft by 8 ft how many linear feet?

In linear feet, 97 feet by 8 feet, is about 145.5. Linear feet is the equivalent of a 12 inch ruler.


How many board feet is 4' x 8'?

To obtain the board measure multiply the length in feet to be covered by the width in feet. If the boards are over one inch thick multiply this by the thickness in inches. Thus assuming the boards are 1 inch thick or less the board measure is 4 x 8 = 32 feet board measure (B.M.)


How many 6 inch picket fence do i need to do 162 feet of a linear ft?

It depends on what angle you are placing them.


How many lineal feet of 4 inch wide boards equals 32 square feet?

1 square foot is created by 3 feet of 4 inch wide boards.This can be seen by laying 3 boards each a foot long next to each other.It follows that:32 * 3 = 96 linear feet of board to cover 32 square feet of surface.The formula:(12/#widthOfBoardInInches#) * #squareFeetToCover# = #linearFeetNeeded#


How many 16 foot x 6 inch boards are needed to cover 264 square feet?

264 sq feet = 16 feet x ? 264 = 16 x ? 264 / 16 = ? 16.5 = ? so, a shape that is 16 feet by 16.5 feet has an area of 264 sq feet. So, you now need to determine how many boards (measuring 16 feet by 6 inches) fit inside a shape measuring 16 feet by 16.5 feet. draw this on paper to help you...remember the units. you need 33 16 foot by 6 inch boards to completely cover a shape 16 feet by 16.5 feet.


How many 16 foot x 6 inch boards are needed to cover 800 square feet?

Convert inches to feet6 inches = 1/2 feetso it is a 16 x 0.5 foot board. Thus, the area of a board is16*0.5 = 8 feet squared.The number of 8 feet squared boards needed to cover 800 squared feet is800 squared feet/8 squared feet = 100


The length of most chalk boards?

1 inch


What is the best way to rip a one by four inch board into two one-half by four inch boards of a given length?

This is more properly called resawing. Strictly speaking what you ask cannot be done. This is because the saw kerf will take up to an eighth inch, making it impossible to get two half-inch boards from a one onch board. A bandsaw with a wide resawing blade would be used. You will have to get/make a very stable fence arrangement with featherboards or similar. It should be at least three quarters as tall as the stock is wide. If your boards do not have a surfaced side, joint one side before resawing.


If 18 feet 10 inches is cut from a wire that is 25 feet 8 inches long what is the lenghth of the that is left?

1 feet = 12 inch(25 feet + 8 inch ) - (18 feet + 10 inch) = (24 feet + 20 inch) - (18 feet + 10 inch)= 6 feet + 10 inchthe reminder is 6 feet 10 inch