~ 1000 cfm
The flow would be 2.5 with a meter with 12 inch diameter. This is with a flush at 5.0 FPS.
Approx 73,167
what is the discharge flow of 10m/s passing from 2ft pipe
There are way too many variables to answer this.what's the head pressure?how long is the run?any 90 or 45 degree bends?what type pipe?Pipe has friction , the longer the run the more pressure that is needed to get the same flow, same with bends in the pipe or fittings.For swimming pools we normally figure we can flow 60 gpm with 2 inch pipe.but again there are things to consider.
it comes in several weights per foot but most common is 5.4#/ft.
So for a typical AC current in a typical lamp cord, the electrons don't actually "flow," instead they vibrate back and forth by about a hundred-thousandth of an inch.
A typical 16-inch bike usually has one gear.
After an inch comes a foot, which is equivalent to 12 inches.
A typical set of steak knives usually contains 8 knives. A knife set which comes with a block often contains items other than knives, however, and can include 20 pieces or more.
If the flow velocity remains the same the flow volume will increase by the square of the diameter ratio.(2/1.25) = 1.6 = diameter ratio1.62 = 2.56 more flow volume through 2 inch pipe compared to 1.25 inch pipe.
12 inch circumference 12 inch circumference
An inch is a twelfth of a foot; the word inch comes from the Latin uncia-, meaning a twelfth.
The maximum resolution varies upon the monitor and what technology it has. The typical resolution for a 17 inch monitor would be 1280 pixels x 1024 pixels.
Water flow rate half inch PVC pipe 65 psi?
1/2 inch deep.
The maximum flow rate through a 1.5 inch pipe is typically around 9 gallons per minute.
1 inch and 1/16