Volume = (84) x (1/6) = 14 cubic feet = 0.52 cubic yard
Multiply the two numbers and you get 1,800 square inches. Each square foot has 144 square inches. So you get 12.5 square feet.
162 square inches, or 1.125 square feet.
Inches is a measure of length. Square Feet is a measure of area. You can't convert from one to another.
None. Inches measure length and square feet measure area so they are not comparable. If you mean 110 square inches, then since there are 144 square inches in a square foot, the answer is 110/144 = 0.764 square feet.
If that's 15 inches by 22 inches, then it's 2.292 square feet. If it's 15 inches by 22 feet, or 15 feet by 22 inches, then it's 27.5 square feet. If it's 15 feet by 22 feet, then it's 330 square feet.
"4 inches" is a length. "7676 square feet" is an area. "4 inches by 7676 square feet" describes a volume, which is equal to 2,558.67 cubic feet. (= 7676/3, because 4 in = 1/3 ft.) So your question is better put as "How many tons of crushed stone does it take to cover an area of 7676 square feet to a depth of 4 inches?" The answer depends on the density of the crushed stone. I can't answer that, but I've given your question a clearer phrasing.
There are no feet or inches in any area.9 square meters of area equates to 96 square feet and 126.03 square inches
The question as stated makes no sense, as square feet is a measure of area and "yard", is a measurement of volume. Normally, "yard" is a measurement of length. However, concrete, soil, gravel, sand, etc., are normally sold (in the U.S.) by the "yard" which is simply short for "cubic yard." However, you may easily calculate the area that a yard of crushed rock will cover, depending on the desired depth of crushed rock. As a cubic yard is 3 feet by 3 feet by 3 feet, which is equivalent to 9 square feet by 36 inches, simply divide 36 inches by the desired depth in inches, and multiply it by 9 square feet. Thus, if you wanted a depth of 8 inches, 36 divided by 8 is 4.5. So, you can cover 4.5 square yards, or 4.5 times 9 square feet = 40.5 square feet, which would be a square area approximately 6 feet 4 inches by 6 feet 4 inches.
No. Area can be measured in many different units - square feet, square inches, square meters, etc.No. Area can be measured in many different units - square feet, square inches, square meters, etc.No. Area can be measured in many different units - square feet, square inches, square meters, etc.No. Area can be measured in many different units - square feet, square inches, square meters, etc.
One square foot is 144 square inches. If you know the area in square inches, divide that by 144 to get square feet. If you know the area in square feet, multiply that by 144 to get square inches.
12.1875 square feet.
There are 61.1 square feet in an area that measures 66x100 inches.
I think you have mis-stated your question. Square feet is an area, feet and inches is a length.
33.92 square feet.
The rectangle is 35 square feet, which would be 5,040 square inches
4 square feet.
The area of the window is 21.8 square feet.