24 feet
if you mean a 30 foot diameter circle, then pi x 152 x 3 = 2119.5 cubic feet of dirt
It depends on whether the dimensions given are in feet or yards or metres or some other unit.
24*4*6 = 576 cubic inches or 2*(1/3)*(1/2) = 1/3 cubic feet.
*
The answer will depend on how long the hole is. The hole has 3 dimensions that determine its volume. You have provided measurements of only two dimensions.
0. zip. none. na-tah. Think about it. If there was a hole with dirt in it, what would that be called? Huh? I'd call it anything but a hole.
There is no dirt in a hole because a hole is defined by the absence of material, in this case dirt. If you were to fill the hole with dirt, it would require 24 cubic feet of dirt to completely fill it.
300 cubic feet of dirt
36 cubic feet of dirt=)
dunnoo....find out urself!
To find out how much dirt it takes to fill a hole measuring 2 feet by 3 feet by 4 feet, you calculate the volume of the hole. The volume is found by multiplying the dimensions: 2 ft × 3 ft × 4 ft = 24 cubic feet. Therefore, it takes 24 cubic feet of dirt to fill the hole.
This is a nonsense question. Tons of dirt can be converted to cubic feet, depending on moisture and dirt type, but not to sf or square feet.
The area of the garden is 9 x 4= 36 ft2, so the volume of dirt you need would be length x width x depth. Since you didn't say what the depth was, the number of bags of dirt, which is equal to the volume you want to fill in cubic feet is just 36 x the depth you want to fill with dirt. If you only want to have about a 2 inch layer of dirt all over your garden, you need 36 ft2 x 1/6 ft = 6 cubic feet = 6 bags of dirt. Good luck!
To fill a hole 2 feet long, 4 feet wide, and 6 feet deep would take 48 (2 x 4 x 6) cubic feet of dirt.
None it's a hole
Convert everything to feet, then multiply length x width x height. Answer is in cubic feet.
The area that 20 tons of dirt would fill depends on the depth of the dirt layer. On average, one ton of dirt occupies about 0.5 cubic yards. Therefore, 20 tons would be approximately 10 cubic yards. If you spread this over an area, for example, a depth of 1 foot, it would cover about 80 square feet. However, this can vary significantly based on the type and density of the dirt.