The scale factor for a model train with a length 36 inches and the length of engine itself is 24 feet would be 1/8th. In order to answer this you will have to do a little math.
25.4 cm = 10 inches
883cc is about 54 cubic inches.
4 by 6 inches = 24 inches = 60.96 cm.This is not the same as 4 inches x 6 inches, which is a measure of area and, therefore, has a different conversion factor.
6
The conversion factor is 1 inch = 2.5 cm So first you would need to convert the feet with which you are beginning into inches. There are 12 inches in a foot, so multiply 6.1 feet by 12 inches which will give you 73.2 inches. Then multiply 73.2 inches by 2.5 cm (see conversion factor above) which gives you 183 centimeters.
288 in.
The conversion factor from 700c wheels to inches is approximately 27.56 inches.
A 5.9 liter engine is equivalent to approximately 360 cubic inches. The conversion factor is 61.02 cubic inches per liter.
The conversion factor from 700c to inches for bike wheels is approximately 27.56 inches.
The conversion factor between inches and meters is 39.37 inches in 1 meter.
The scale factor is 3:1
The largest Form Factor was the EATX motherboard. The board measured 12 inches by 13 inches. Today the largest is the BAX motherboard which measures 10.5 inches by 12.8 inches.
The largest Form Factor was the EATX motherboard. The board measured 12 inches by 13 inches. Today the largest is the BAX motherboard which measures 10.5 inches by 12.8 inches.
22 centimeters is approximately 8.66 inches. To convert centimeters to inches, you can use the conversion factor where 1 centimeter equals 0.393701 inches. Therefore, multiplying 22 by this factor gives you the equivalent in inches.
To find the scale factor, divide the height of the basketball player by the height of the model. The player is 6 feet 8 inches tall, which is equivalent to 80 inches (6 feet x 12 inches/foot + 8 inches). The model is 5 inches tall, so the scale factor is 80 inches / 5 inches = 16. Therefore, the scale factor is 16:1.
364 cubic inches in a 6.0L engine.
8 mm is approximately 0.315 inches. To convert millimeters to inches, you can use the conversion factor where 1 mm equals about 0.03937 inches. Therefore, multiplying 8 mm by this factor gives you the equivalent in inches.