There are 30 minutes in half an hour, so:
30 x 552 = 16560
It takes 1 minute to rotate 1 time.
As long as the 30 minute are spent driving in a straight line, the acceleration is zero.
I would like to state first that you misspelled horizontal. The answer to your question is Constant speed.
Constant speed (in a straight line) means there is no acceleration.Constant speed (in a straight line) means there is no acceleration.Constant speed (in a straight line) means there is no acceleration.Constant speed (in a straight line) means there is no acceleration.
His speed is (3/8 ft)/(3/4 minute) = 1/2 feet per minute.
Angular
Linear
Uniform-Pertaining to computers-"Some later CD drives use CLV technology in combination with constant angular velocity (CAV). With CAV, the disc rotates at a constant speed, just as is done with hard drives."(pg 459, A+ Guide to Managing and Maintaining Your PC)
"Some later CD drives use CLV technology in combination with constant angular velocity (CAV). With CAV, the disc rotates at a constant speed, just as is done with hard drives."(pg 459, A+ Guide to Managing and Maintaining Your PC)
No. Earth's rotation speed is affected by the gravitational pull of the sun, moon and planets.
Because it rotates at a constant (i.e.synchronous speed ) no matter whats the load on alternator.For instance if its a 2 pole machine it will rotate at 3000 rpm to produce a frequency of 50 Hz in India.
Exactly the same way that the speed can be constant but the distance keeps increasing.If the acceleration happens to be an increase in speed, then "constant" accelerationmeans that the speed will increase just as much in the 7th minute, for example,as it increased in the 4th minute, for example, etc.Acceleration can be the rate at which speed changes. So if the acceleration is constant,then the speed is changing at a constant rate.(Note: Acceleration doesn't have to be a change of speed. It can also be a changeof direction, at constant speed.)
if the fan rotates at constant speed ,then it's angular velocity is constant so net torque must be zero
The body observing the force is either in stationary position or rotates with constant speed.
Universal joints (as used on a conventional prop shafts used in rear wheel drive cars) cause the output end off the shaft to rotate at varying speeds, while the input end rotates at a constant speed, i.e. it speeds up and slows down at it rotates. Using a CV or 'Constant Velocity' joint eliminates this variation in speed. The use of moveable joints in drive shafts is the allow for suspension/steering movements.
The moon does rotate on its axis as the earth does. The earth rotates once in a day and the moon rotates once in a month ( for those who want to quibble, it's a little more than 27 days ). ADD---the moon rotate at the same speed of the earth, that why we always see the same side of the moon which give the impresion that the moon doesnt rotate but it does!
There is no planet that takes 25 days to rotate on its axis. However, the equator of the sun rotates in about 25 days. (Not all of the sun rotates at the same speed, it slows down as it gets closer to the poles. At the poles, the sun rotates in about 36 days, and in the middle it takes about 30 days.)