what is horizantal and vertical prototyping
No, it is measured in positive numbers but it can be represented by negative numbers.
The opposite of a height is a depth. The opposite direction measurement of height (vertical) is width (horizontal).
Length times width times depth ( L x W x D ) measures cubic feet and must be measured in feet.
A line departs from the vertical when it deviates from a 90-degree angle. The amount of departure can be measured in degrees, with a line being perfectly vertical at 0 degrees and completely horizontal at 90 degrees. So, the more a line departs from the vertical, the further away it gets from standing straight up like a soldier.
To convert measured depth to true vertical depth, first write down the measured depth. You will have to map an X, Y, Z point from that calculation, as well as using the azimuth and inclination.
It is usually a linear measure in the vertical direction, measured downwards. If measured upwards, the same measure could be called a height.
Vertical erosion is when the depth of the river is greater than the width causing erosion to take place on the bed of the river. This is also when lots of water enters the river but not as much is exiting it.
The depth in the ocean is measured by sounding using echo-sounders. Nowadays satellites are also used for this purpose.
Access to a seam or ore body at greater depth is done by a vertical or nearly vertical path known as a pit or a shaft. In India, above 30 metre s depthshafts is used as access
Floods are measured by a known level of depth. If the water level is over that depth, it may be considered a flood.
what is horizantal and vertical prototyping
Because of the weight of the water above.
Vertial Speed is final depth minus intitial depth divided by time
Horizontal, Vertical, Depth
No, it is measured in positive numbers but it can be represented by negative numbers.
Depth is not a dimension of a cylinder. Also, depth is measured in feet, not sq feet.