An error in measuring the radius (or diameter) of the cylinder has a greater effect on the accuracy of the volume calculation than an error in measuring the cylinder's length, since the volume is proportional to the square of the radius.
a solid consists of a cuboid, to which a quadrant of a cylinder is attached. AE=20cm,ED=30cm,DC=20cm and CR=70cm. Calculate the volume of the solid.
The formula for calculating the volume of a hexagonal prism is to take the area of the hexagon, then multiply it by the height of the prism.
To find the volume of a stack of centimeter cubes you only need to have the dimension of one side. Once you get the dimension of one side you can find its cube to get the volume of the stack.
You are finding the volume of the solid figure.To find the volume of a solid figure, depending on the size of the object, you can use a graduated cylinder. You can fill the cylinder up to x amount of water and then measure the amount after dropping the solid into the water, and then subtract the amount before, from the amount after, to get the volume of a solid. You can also use simple mathematics to figure the volume of the solid. There are different formulas for calculating volume for different types of solid figures.
The volume of a cylinder is represented by this formula:r2Ï€hwhere r = radius of circular baseand h = height of cylinder
A graduated cylinder is a common tool used for measuring precise volumes of liquids in a laboratory setting. It has markings along its length that allow for accurate measurement of the liquid volume.
A cylinder with a radius of 6 feet and a height of 24 feet has a volume of 2,714.34 cubic feet.
Volume in cubic units = pi*(diameter/2)2*height
That depends on the shape. If it is a uniform configuration with simple sides or walls where accurate dimension are used then calculating the volume is more accurate. If the cavity is of a unusual shape such as the combustion chamber for a cylinder head on an engine, then water displacement is more accurate. With modern software, dimension for such a cavity can be calculated by computer. However, variation to the cavity when machined or cast will never be the same as the computer model. R. Clontz
The measurement of volume using a graduated cylinder is considered to be relatively precise, as the markings on the cylinder allow for accurate readings to be taken. However, the precision of the measurement can be affected by factors such as the skill of the person taking the measurement and the size of the increments on the cylinder.
gradulated cylinder
The formula for Cylinder:If we have a cylinder with the radius r, pi is 3.1415, and height h, the volume V of the cylinder is:V = (r squared) (pi) (h)If your radius and height are measured in inches, the volume is in cubic inches.
They are both 3D shapes and use pi in calculating area or volume
A graduated cylinder is an instrument used to accurately measure the volume of liquids. It has volume graduations marked on its side, allowing for precise readings to be taken.
Think of a toilet roll ey?? its like a cylinder on ya
A graduated cylinder is typically more precise than a beaker because it has measurement markings with smaller increments, allowing for more accurate volume readings. Beakers are generally used more for approximate measurements and mixing rather than precise volume measurements.
Graduated cylinder